Data Sheet

Smart Machine Smart Decision
+CME ERROR: <err>
Parameters
<value> network parameters, refer to AT+SAPBR
Parameter Saving AT+CMMSSCONT
Mode
Max Response Time -
Reference Note
15.2.4 AT+CMMSSENDCFG Set the Parameters for Sending MMS
AT+CMMSSENDCFG Set the Parameters for Sending MMS
Response
+CMMSSENDCFG: (0-6), (0-3),(0,1), (0,1),(0-2),(0-4),(1-2),(0,1)
OK
Test Command
AT+CMMSSENDC
FG=?
Parameters
See Write Command
Response
+CMMSSENDCFG:
<valid>,<pri>,<sendrep>,<readrep>,<visible>,<class>,<subctrl>,<no
tifrspcheck>
OK
Read Command
AT+CMMSSENDC
FG?
Parameters
See Write Command
Response
OK
or
ERROR
or
+CME ERROR: <err>
Write Command
AT+CMMSSENDC
FG=<valid>[,<pri>[
,<sendrep>[,<readre
p>[,<visible>[,<class
>[,<subctrl>
[,<notifrspcheck>]]]
]]]]
Parameters
<valid> The valid time of sent MMS
0 1 hour
1 12 hours
2 24 hours
3 2 days
4 1 week
5 maximum
SIM800 Series_AT Command Manual_V1.05 305 2014-07-31