Data Sheet

Smart Machine Smart Decision
<clir>
I Override the CLIR supplementary service subscription
default value for this call
Invocation (restrict CLI presentation)
i Override the CLIR supplementary service subscription
default value for this call
Suppression (allow CLI presentation)
<cug>
G Control the CUG supplementary service information
for this call
CUG Not supported
g Control the CUG supplementary service information
for this call
CUG Not supported
<;> Only required to set up voice call , return to
Command state
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference Note
V.25ter Parameter "I" and "i" only if no *# code is within the dial string
*# codes sent with ATD are treated as voice calls. Therefore, the Command
must be terminated with a semicolon ";"
See ATX Command for setting result code and call monitoring parameters.
2.2.5 ATD><str> Originate Call to Phone Number in Memory Which Corresponds to
Field <str>
ATD><str> Originate Call to Phone Number in Memory Which Corresponds to Field
<str>
Execution Response
This Command make the TA attempts to set up an outgoing call to stored
Command
ATD><str>[<clir
number.
All available memories are searched for the entry <str>.
>][<cug>][;]
Note: This Command may be aborted generally by receiving an ATH
Command or a character during execution. The aborting is not possible
during some states of connection establishment such as handshaking.
If error is related to ME functionality
+CME ERROR: <err>
If no dial tone and (parameter setting ATX2 or ATX4)
NO DIALTONE
SIM800 Series_AT Command Manual_V1.05 31 2014-07-31