Data Sheet

Smart Machine Smart Decision
Reference Note
15.2.17 AT+CMMSREAD Read the Given File of the MMS in the Buffer
AT+CMMSREAD Read the Given File of the MMS in the Buffer
Test Command Response
AT+CMMSREAD= OK
?
Response
+CMMSREAD: <name> <datSize>
File content
OK
Write Command
AT+CMMSREAD=
<fileIndex>
Parameters
<fileIndex> the index of the file to be read from the MMS in the
buffer，i.e. the parameter <fileIndex> in
“AT+CMMSRECV” and “AT+CMMSVIEW”
<name> the file name to be read
<datSize> the size of the file to be read
Parameter Saving NO_SAVE
Mode
Max Response Time 5s
Reference Note
If the file type is text, the character set of the output text is Unicode little
endian without the header “FF FE”.
15.2.18 AT+CMMSRDPUSH Read the Information of the MMS PUSH Message
AT+CMMSRDPUSH Read the Information of the MMS PUSH Message
Test Command Response
+CMMSRDPUSH: (range of <index>)
AT+CMMSRDPUS
H=?
OK
Write Command Response
AT+CMMSRDPUS +CMMSRDPUSH:
H=<index> 2,”<sender>”,”<subject>”,”<transaction>”,”<location>”,”<time>”,<
class>,<size>
OK
or
SIM800 Series_AT Command Manual_V1.05 316 2014-07-31