Data Sheet

Smart Machine Smart Decision
Mode
Max Response Time -
Reference Note
When exiting the MMS function, this command must be executed.
15.2.25 AT+CMMSSCONT Save MMS Context
AT+CMMSSCONT Save MMS Context
Response
OK
Test Command
AT+CMMSSCONT
=?
Parameters
See Execution Command
Response
+CMMSSCONT: <mode>
+CMMSCID: <value>
+CMMSCURL: <mmscurl>
+CMMSUA: <UA>
+CMMSPROFILE: <UAProfile>
+CMMSPROTO: <Gateway>,<Port>
+CMMSSENDCFG:<valid>,<pri>,<sendrep>,<readrep>,<visible>,<
class>,<subctrl>,<notifyskip>
+CMMSTIMEOUT: <Send timeout>,<Recv timeout>
OK
Read Command
AT+CMMSSCONT
?
Parameters
See Execution Command
Response
OK
Execution Command
AT+CMMSSCONT
Parameters
<mode> 0 saved, the value from NVRAM
For other parameters, see the related command.
Parameter Saving NO_SAVE
Mode
Max Response Time -
Reference Note
SIM800 Series_AT Command Manual_V1.05 322 2014-07-31