Data Sheet

Smart Machine Smart Decision
17 AT Commands for RECORD Application
17.1 Overview
Command Description
AT+CREC Record operation
AT+CRECORD Record and send data to UART
17.2 Detailed Descriptions of Commands
17.2.1 AT+CREC Record Operation
AT+CREC Record Operation
Response
+CREC: (1-n),(1-10)
OK
Test Command
AT+CREC=?
Parameters
See Write Command
Response
+CREC: <status>
OK
Read Command
AT+CREC?
Parameters
<status> 0 idle state
1 recording state
2 playing state
Write Command Response
AT+CREC=<mo OK
de>,[<id>]
1) mode=1,start record
AT+CREC=1,<id>,<form>,[<time>][,<location>],[<quality>],[<input
path>]
OK
2) mode=2,stop record
AT+CREC=2
OK
+CREC: 2,<id>,<form>,<time>,<len>
SIM800 Series_AT Command Manual_V1.05 325 2014-07-31