Data Sheet

Smart Machine Smart Decision
dialing context.
2.2.7 ATE Set Command Echo Mode
ATE Set Command Echo Mode
Response
This setting determines whether or not the TA echoes characters received
from TE during Command state.
OK
Execution
Command
ATE<value>
Parameters
<value> 0 Echo mode off
1 Echo mode on
Parameter Saving AT&W_SAVE
Mode
Max Response -
Time
Reference Note
V.25ter
2.2.8 ATH Disconnect Existing Connection
ATH Disconnect Existing Connection
Execution Response
Command Disconnect existing call by local TE from Command line and terminate call
ATH OK
Note: OK is issued after circuit 109(DCD) is turned off, if it was previously
on.
Parameter Saving NO_SAVE
Mode
Max Response 20s
Time
Reference Note
V.25ter
2.2.9 ATI Display Product Identification Information
ATI Display Product Identification Information
Execution Response
Command TA issues product information text
ATI
Example:
SIM800 R11.08
SIM800 Series_AT Command Manual_V1.05 34 2014-07-31