Data Sheet

Smart Machine Smart Decision
When the presentation of the CLI at the TE is enabled (and calling
subscriber allows), an unsolicited result code is returned after every RING
(or +CRING: <type>) at a mobile terminating call.
+CLIP: <number>,<type>[,<subaddr>,<satype>,<alphaId>,<CLI
validity>]
Parameters
<number> String type (string should be included in quotation marks)
phone number of calling address in format specified by <type>.
<type> Type of address octet in integer format;
129 Unknown type
161 National number type
145 International number type
177 Network specific number
<subaddr> String type (
subaddress of format specified by <satype>)
<satype> Integer type (type of subaddress)
<alphaId> String type (string should be included in quotation marks)
alphanumeric representation of <number> corresponding to the entry
found in phone book.
<CLI validity>
0 CLI valid
1 CLI has been withheld by the originator.
2 CLI is not available due to interworking problems or
limitations of originating network.
Parameter Saving NO_SAVE
Mode
Max Response 15s
Time
Reference Note
3.2.19 AT+CLIR Calling Line Identification Restriction
AT+CLIR Calling Line Identification Restriction
Response
+CLIR: (list of supported <n>s)
OK
Test Command
AT+CLIR=?
Parameters
See Write Command
Read Command Response
AT+CLIR? +CLIR: <n>, <m>
OK
SIM800 Series_AT Command Manual_V1.05 75 2014-07-31