Data Sheet

Smart Machine Smart Decision
See Write Command
Response
+CMEE: <n>
OK
Read Command
AT+CMEE?
Parameters
See Write Command
Response
TA disables or enables the use of result code +CME ERROR: <err> as an
indication of an error relating to the functionality of the ME.
OK
If error is related to ME functionality:
+CME ERROR:<err>
Write Command
AT+CMEE=[<n>
]
Parameters
<n> 0 Disable +CME ERROR: <err> result code and use ERROR
instead.
1 Enable +CME ERROR: <err> result code and use numeric
<err>
2 Enable +CME ERROR: <err> result code and use verbose
<err> values
Parameter Saving AT&W_SAVE
Mode
Max Response -
Time
Reference
3GPP TS 27.007
Note
[13]
3.2.21 AT+COLP Connected Line Identification Presentation
AT+COLP Connected Line Identification Presentation
Response
+COLP: (list of supported <n>s)
OK
Test Command
AT+COLP=?
Parameters
See Write Command
Read Command Response
AT+COLP? +COLP: <n>,<m>
OK
If error is related to ME functionality:
+CME ERROR: <err>
SIM800 Series_AT Command Manual_V1.05 77 2014-07-31