Data Sheet

Smart Machine Smart Decision
Time
Reference Note
3.2.22 AT+COPS Operator Selection
AT+COPS Operator Selection
Response
TA returns a list of quadruplets, each representing an operator present in
the network. Any of the formats may be unavailable and should then be an
empty field. The list of operators shall be in order: home network,
networks referenced in SIM, and other networks.
+COPS: (list of supported<stat>,long alphanumeric<oper>,short
alphanumeric<oper>,numeric <oper>)s[,,(list of supported <mode>s),
(list of supported <format>s)]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Test Command
AT+COPS=?
Parameters
See Write Command
Response
TA returns the current mode and the currently selected operator. If no
operator is selected, <format> and <oper> are omitted.
+COPS: <mode>[,<format>, <oper>]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Read Command
AT+COPS?
Parameters
See Write Command
Response
TA forces an attempt to select and register the GSM network operator. If
the selected operator is not available, no other operator shall be selected
(except <mode>=4). The selected operator name format shall apply to
further read commands (+COPS?).
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+COPS=<mo
de>,[<format>[,<
oper>]]
Parameters
<stat> 0 Unknown
1 Operator available
SIM800 Series_AT Command Manual_V1.05 79 2014-07-31