Data Sheet

Smart Machine Smart Decision
Parameters
See Write Command
Response
TA controls whether or not the extended format of incoming call
indication is used.
OK
Parameters
<mode> 0 Disable extended format
1 Enable extended format
Omitted Use previous value
Unsolicited Result Code
When enabled, an incoming call is indicated to the TE with unsolicited
result code +CRING: <type> instead of the normal RING.
Write Command
AT+CRC=[<mod
e>]
Parameters
<type> ASYNC Asynchronous transparent
SYNC Synchronous transparent
REL ASYNC Asynchronous non-transparent
REL SYNC Synchronous non-transparent
FAX Facsimile
VOICE Voice
Parameter Saving NO_SAVE
Mode
Max Response -
Time
Reference
3GPP TS 27.007
Note
[13]
3.2.32 AT+CREG Network Registration
AT+CREG Network Registration
Response
+CREG: (list of supported <n>s)
OK
Test Command
AT+CREG=?
Parameters
See Write Command
Read Command Response
AT+CREG?
TA returns the status of result code presentation and an integer <stat>
which shows whether the network has currently indicated the registration
of the ME. Location information elements <lac> and <ci> are returned
only when <n>=2 and ME is registered in the network.
+CREG: <n>,<stat>[,<lac>,<ci>]
SIM800 Series_AT Command Manual_V1.05 89 2014-07-31