User Manual

1 2 3
● LED lamp
It is useful for the engineer to install and
maintain security system at night. LED On/Off
pressing button, easy to operate.
● The battery graphic display
The tester has advanced power control and
protection circuit, low-power energy saving, 4 to 5
hours on a single charge. Normally it can be used
for 5 hours.
2、Product Accessories
● HD coaxial camera tester
● Adapter DC5V 1A（with micro USB cable）
● International Standard 18650 2600ma
battery
● BNC cable
● RS485 connector
● P o w e r o u t p u t c o n v e r s i o n c a b l e
● Audio cable
● Wrist band
● Instruction Manual
1. General
The new HD coaxial camera tester is developed
for the on-site installation and maintenance of HD
coaxial camera, having TVI, AHD and CVI. It also
provides many useful functions, such as video
display, PTZ Control over Coax, PTZ control(RS485),
DC12V output power, audio test, LED lamp etc.
Product Functions
● HD coaxial camera testing
● PTZ Control over Coax
● PTZ controller (RS485)
The Tester built-in Pelco-D / P PTZ control
protocol, etc., through its own RS485 interface.
● DC12V output power
Power the camera with DC12V power output
from the tester. It is helpful for testing when the
power supply is not available.
● Audio testing
● CVBS camera testing
● TVI camera testing (Optional) *
● AHD camera testing (Optional) *
● CVI camera testing (Optional) *
● Enhanced UTP cable testing
By UTP CABLE TEST port on the meter, you
can test the connection of network cable.
3、 Front Panel
Off/ON DC 5V IN AUDIO IN DC 12V OUT
CHARCE LED 12v out LED DATE LED POWERLED