GAS CHOPPER SCOOTER Assembly and User's Manual 88905, 88969

PRE-RIDE ADJUSTMENTS

TIRE ADJUSTMENTS:

Make sure that the air pressure for all tires is 50 PSI . If the tires have less than the recommended

amount of pressure, poor handling, and damage to the tires and rims may occur. Use an air

pressure gauge to check for the air pressure of the tire.

DO NOT USE GAS STATION AIR FILLING STATIONS AS THE PRESSURE IS USUALLY TOO HIGH AND THE

GAUGES ARE INACCURATE. OVER INFLATION OF THE TIRE COULD CAUSE A BLOW OUT AND CRASH.

WHEEL ADJUSTMENTS/MAINTANENCE:

1. Wheels should rotate straight and freely

2. A lubricant or oil should be applied to the wheel bearings monthly or more often if ridden in

extremely wet or dusty conditions.

3. If rear wheel feels restricted , Refer to Drive Chain adjustments or Brake adjustments

3. If front wheel feels restricted , Refer to Brake adjustments

Periodically check tires, wheels, bearings, and cables. Any rust? Kinks? Fraying? If so, DO NOT ride the

GAS CHOPPER SCOOTER™. Call Electra customer service at 1-888-467-1234 M-F 10am - 9pm EST or

visit your local bicycle dealership and have them adjusted or replaced.

Proper Tire Pressure 50 PSI

IMPORTANT INFORMATION!!!

PSI

30 50