Manual Dialing Press outside line button, Dial telephone number. Lift handset to converse.* l l l SpeedDialing Press outside Press speed Press station Press speed Dial system Lift handset l l l l l l .,! .j ., . line button, dial button [SPD]; display will show Sd. speed dial button 1-16; display will show 01-16; or dial button[SPD] ; display will show W. speed dial access code 20-59; display will show ZO-59, to converse.
Hold l , Press HOLD button NOTE: Outside once; display will show Hd. line LED will flash intermittently at your keyset. ExclusiveHold l Press HOLD button ‘twice; display will show EH. NOTE: Outside line LED will flash intermittently at your keyset. Calls placed on exclusive hold cannot be accessed from any other keyset. Hold Reminder Display will show HI-H6 indicating LED at line button is fluttering, Lift handset. 0 Press slow flashing line button, l l l l l held line.
l l l l l l l Lift handset. Press direct station selection button (DSS) I-16; display will show 01-16 and ICM LED lights. Following tone burst announce message; or pressed to send tones. When busy, the DSS button can be repeatedly Upon receiving intercom call, calling part@ station number Check that MIC button LED is lit to respond handsfree; or Lift handset. is displayed, NOTE: If engaged in an outside call and ICM call is received; press HOLD button and converse with callingi party. displayed.
.) l l l0 l l0 l l Lift handset. Press direct station selection button (DSS) I-16; display will show 01-16 and ICM LED lights. Following tone burst announce message; or When busy, the DSS button can be repeatedly pressed to send tones, Upon receiving intercom call, calling party’s station number Check that MIC button LED is lit to respond handsfree; or Lift handset. is displayed. NOTE: If engaged in an outside call and ICM call is received; press HOLD button and converse with calling party.
l l l l l Place first call. Press ADD ON Place second Press ADD ON Converse with buttdn; LED flashes, call. button. all parties. NOTE: A three-party conference may consist of the following: 0 3 stations. l 2 stations + 1 outside line. 0 1 station + 2 outside lines.
\ l l l l Lift handset, Press DOOR PHONE button; display will show d. Dial 1 or 2; display will show dl or d2, Converse with party. NOTE: If monitoring l l l l is desired, place Lift handset. Press DOOR PHONE button. Dial 1 or 2, Converse with party, keyset in monitor mode by pressing ON/OFF button; adjust volume.
display will showSd. l Press SPD PROG button; i Press button 1-16; display will show 01-E. number; digits will be displayed l Dial telephone l Press SPD PROG button. NOTE: Pauses (Pause) and hookflashes as dialed, [RECALL) may be programmed as part of a speed . dial memory. Press SPD button; display will show Sd. Press button 1-16; display will show 01-16, *Verify number displayed. l l .
I To eliminate all ICM calls and audible l Press DND button; LED lit. indications: To cancel DND mode: l Press DND button; LED off. ..j :! _: ’ ; at another To answer an ICM call which is signaled l Lift handset, l Press PICK UP button; display will show UP. l Press DSS button 1-16 of called station.