User manual
Preparing the food
1. Clean and cut the ingredients.
2. Season the ingredients.
3. Fill the ingredients in suitable vacuum
bags.
4. Vacuum seal the bag to make sure
that you remove as much air as
possible.
5. Cold storage of the bags is mandatory
in case the cooking procedure is not
done immediately.
6. Continue with the function: SousVide
Cooking following applicable cooking
table indications for the considered
type of food or the assisted cooking
recipes.
7. Open the pouch and serve.
8. Optional: finish the food with a final
searing or grilling e.g. for meat to
achieve a nice crust and the typical
roast flavour.
Activating a function: SousVide
Cooking mode
1.
Activate the appliance.
2. Select the menu: SousVide Cooking.
3. Press
to confirm.
4. Set the function: SousVide Cooking
mode.
5. Press to confirm.
6. Set the temperature.
7. Press
to confirm.
Cooking with this function
causes residual water on the
vacuum bags and in the
cavity. After the cooking
process open the door
carefully to avoid the water
dropping on the furniture.
Use a plate and a towel to
take out the vacuum bags.
Dry out the door, the water
drop collector in the bottom
and the cavity with a soft
cloth or a sponge. Let the
appliance dry fully with the
door open. To speed up the
drying you can heat up the
appliance with hot air at
temperature 150 °C for
approximately 15 minutes.
6.13 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
6.14 Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold for 3
seconds. The heat-up indicator alternates.
6.15 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
Minute Minder To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of
the appliance. You can also activate it when
the appliance is deactivated.
Use to activate the function. Press
or to set the minutes and to start.
Duration To set the length of an operation (max. 23 h
59 min).
ENGLISH
23