Specifications

Document Revision 1 Electra Elite IPK II
2 - 16 Program 10 : System Configuration Setup
Description
Use Program 10-08 : Ringing Setup to enable or disable pre-ringing for trunk calls.
This sets how a trunk initially rings a telephone. With pre-ringing, a burst of ringing
occurs as soon as the trunk’s LED flashes. The call then continues ringing with the
normal ring cadence cycle. Without pre-ringing, the call starts ringing only when the
normal ring cadence cycle occurs. This may cause a ring delay, depending on when
call detection occurs in reference to the ring cycle.
Conditions
Used with Analog Trunks only.
Feature Cross Reference
Central Office Calls, Answering
Synchronous Ringing
Program 10 : System Configuration Setup
10-08 : Ringing Setup
Level:
IN
Input Data
Item
No.
Description Input Data Default
01
Ringing Setup
0 = Disable
1 = Enable
0