Service manual
Table Of Contents
- PXD Series R410A
- LIST OF EFFECTIVE PAGES
- TABLE OF CONTENTS
- INTRODUCTION
- PRODUCT DATA SHEET
- RATING CONDITIONS
- OUTLINE DIMENSIONS
- PERFORMANCE DATA & PRESSURE CURVES
- ELECTRICAL DATA
- WIRING DIAGRAMS
- ELECTRICAL CONNECTIONS
- REFRIGERATION DIAGRAMS
- TUBING CONNECTIONS
- CONTROL SYSTEM
- TROUBLESHOOTING
- EXPLODED VIEWS & SPARE PARTS LISTS
- OPTIONAL ACCESSORIES
- APPENDIX A
- INSTALLATION MANUAL
- PROGRAMMING & OPERATING MANUAL
OPTIONAL ACCESSORIES
14-8 Revision Y05-01 Service Manual - PXD Series
KIT INSTALLATION: (Fig.2)
1 Insert the metal support in the slots (push to break the polystyrene
behind the slot)
2 Fix the supports with the supplied screws
3 Cover the metal supports with the foam squares (to avoid air by-pass)
4 Slide the heater assembly into the PXD
5 Fix the heater assembly to the supports with the supplied screws
ELECTRICAL CONNECTIONS
- Place the wiring in the corner so that the unit top can be replaced
MODELS PXD 12 - 15 - 18 - 24 - 28 - 32
- Connect the wires with 6.35 connectors directly to the control board
as shown
Fig.2
wiring
Violet wire to HE2
Black wire to HE1
Blue wire to N'1
CONTENT
CONTENT