User Manual

ManualsBrandsElectra ManualsFor bicyclesSteel Wire Basket (368769, 368787, 368819)

ELECTRA BICYCLE COMPANY ,LLC. • 3275 CORPORATE VIEW, VISTA, CA 92081

TEL 760-607-2453 • ORDERLINE 800-261-1644 • FAX 760-598-7350 • WWW.ELECTRABIKE.COM

EBC_#368769_INSTR_DEC12

Steel Wire Basket Installation Instructions

(EBC PN: #368769, #368787 and #368819)

Summary of content (4 pages)

PAGE 1
Steel Wire Basket Installation Instructions (EBC PN: #368769, #368787 and #368819) EBC_#368769_INSTR_DEC12 ® ELECTRA BICYCLE COMPANY ,LLC. • 3275 CORPORATE VIEW, VISTA, CA 92081 TEL 760-607-2453 • ORDERLINE 800-261-1644 • FAX 760-598-7350 • WWW.ELECTRABIKE.
PAGE 2
Steel Wire Basket Installation Instructions Designed to fit most 700c & 26”wheel bicycles. Will not work on bicycles equipped with a suspension fork. DIFFICULTY LEVEL: Easy If you are not comfortable installing basket, please have it professionally installed by your Electra dealer.
PAGE 3
STEP 1: Installation of fork strut to basket 1) Mount strut legs to bottom of basket with two 16mm Phillips head screws and the steel plate buckle 2) Tighten screws using Phillips screwdriver DO NOT OVERTIGHTEN STEP 1:1 STEP 1:2 STEP 2: Installation of headset bracket 1) Remove stem/handlebar combination using a 6mm hex wrench 2) Remove top nut using 32, 36mm or adjustable wrench and put aside 3) Remove steel key washer (if applicable) 4) Install mounting bracket in place of key washer, lip side faces do
PAGE 4
STEP 3: Attaching basket to headset bracket STEP 3:1-2 1) Thread Phillips screws through inner plate and headset bracket 2) Install nylon lock nuts, tighten w/10mm wrench STEP 4: Attaching fork strut to fork eyelets or hub axle Eyelet mounting 1) Remove any existing bolts that may be supporting fender stays (front/upper stay only) 2) Using the included 12mm hex head bolts with washers, mount the fork strut to the upper/front eyelets 3) Reinstall any existing fender stays STEP 4:1-3 Eyelet Mounting Hub