Verse Alloy Rack Installation Instructions ELECTRA BICYCLE COMPANY , LLC. • 3270 CORPORATE VIEW, SUITE A, VISTA, CA 92081 TEL 760-607-2453 • ORDERLINE 800-261-1644 • FAX 760-598-7350 • ELECTRABIKE.
Verse Alloy Rack Installation Instructions DIFFICULTY LEVEL: Easy 1) TOOLS NEEDED Required: · 4mm hex wrench · 10mm or adjustable wrench · 8mm or adjustable wrench or Phillips screwdriver 2) PARTS LIST (1) rack (2) adjustable arms, 220mm long (2) adjustable arms, 230mm long (4) M5 hex head machine screws w/washers, 17mm long NOTE: The rack includes two sets of adjustable arms. Be sure to use the correct arms for the frame size of your Verse. 220mm (short) arms fit: 18.
STEP 1: Installation of arms to rack top 1) Using chart from the previous page, select the proper arms for your Verse. a. If needed, replace arms by removing plastic end caps and sliding new arms into place. 2) Install arms to rack top using included bolts. 10mm nuts on mounting block are to be facing out. STEP 1:2 Note: Arms will arc upward when using 220mm arms and arc downward when using 230mm arms. 3) Do not fully tighten hardware yet.
) Tighten rack top hex bolts with 4mm hex wrench. 5) Tighten 10mm nuts on underside of rack deck with 10mm wrench. 6) Mount reflector to rear rack mounting plate using 8mm wrench or Phillips screwdriver. If you have questions regarding assembly, please visit your local Electra dealer or call Electra Customer Service at 800-261-1644 (8AM – 4PM Pacific Time). STEP 2:4 STEP 2:5 STEP 2:6 ELECTRA BICYCLE COMPANY , LLC.