Service manual

ELECTRICAL DATA
7. ELECTRICAL DATA
Power Supply 1 PH, 220-240 VAC, 50Hz
Connected to Outdoor
Maximum Current 16 A
Inrush Current 35 A
Starting Current 11 A
Circuit breaker 20 A
Power supply wiring - No. x cross section 3 X 2.5 mm
2
Interconnecting cable - No. x cross section 4 X 1.5 X 1.5 mm
2
(For each IDU)
Note:
• Inrush current is the current when power is up. (charging the DC capacitors
at outdoor PCB).
• Starting current is the current at comp; start up.
NOTE
Power wiring cord should comply with local lows and electrical
regulations requirements.
Revision 0 7-1