Operation Manual

BNET (a BSX ™ Product) Operation Manual
Office: 972 (0) 73-3354727 Fax : [phone] Page 3 of 17
1. CHAPTER 1 - INTRODUCTION
1.1. PURPOSE OF THIS MANUAL
This manual describes the BNET Vehicular and details the operating and deployment
procedures performed on the system.
1.2. ARRANGEMENT OF THIS MANUAL
This manual includes the following chapters :
Chapter 1 – Introduction
This chapter provides general information on the scope and arrangement of the manual,
a list of applicable documents, general safety instructions, definition of warnings,
cautions and notes.
Chapter 2 - Safety Instructions
This chapter provides safety instructions for technicians and operators of the BNET
system. When working with the system, follow these safety instructions to avoid physical
injury or damage to equipment.
Chapter 3 - System Description
This chapter describes the: system’s purpose, main features, main subsystems including
components, and block diagram.
Chapter 4 - Deployment and Operation
This chapter provides the procedures for installing the system, including specification of
required personnel, tools, and materials. In addition, this chapter provides the procedures
for maintenance and operational system deployment.