Operation Manual

BNET (a BSX ™ Product) Operation Manual
Office: 972 (0) 73-3354727 Fax : [phone] Page 6 of 17
2. CHAPTER 2 – Safety Instructions
2.1. SCOPE
This chapter provides safety instructions for technicians and operators of the BNET
system. When working with the system, follow these safety instructions to avoid physical
injury and damage to equipment.
2.2. GENERAL SAFETY INSTRUCTIONS
The safety instructions in this chapter are in addition to, and do not replace, the local
regulations and standards that are relevant to the operation and maintenance of the
BNET system.
1) In the event of injury, seek immediate medical attention.
2) Only trained personnel are permitted to perform BNET system operation and
maintenance tasks, including all safety aspects. Follow the general safety
instructions in this chapter and safety instructions for specific cases.
2.3. ELECTRICAL HAZARDS
The BNET Vehicular system environment exposes personnel to risk of electrocution from
DC power sources:
• To avoid electricity hazards, apply the following and any other applicable safety
instructions according to local regulations and standards:
• Make sure that each BNET Vehicular subsystem is properly grounded.