User Manual

Page 6 of 9
CONTROL PANEL
1. ON / OFF: Press this button to turn the air cooler on and off.
2. SPEED: Press to select the desired fan speed between Low, Medium and High
3. OSC: Press this button to start the oscillation function (Left to right movement of inner louvres). Press it
again to turn off oscillation.
4. COOLER: Press this button to turn on the humidifying function to cool the air. Press it again to switch it
off. If the water level is too low, the unit will bleep, please add water and reinsert the water tank.
5. TIMER: Repeatedly press to select the number of hours the unit will run (upto 7 hours) before entering
standby mode. The duration of the timer set is the sum of the times illuminated.
6. MODE: Choose the Fan mode between the following options
a. NORMAL: The fan will run at a constant speed
b. NATURAL: The fan speed will vary to imitate a natural breeze (Fan speed cannot be changed)
c. NIGHT: The fan will run at its lowest setting to minimize noise. (Fan speed cannot be changed)
Remote Control
The controlling distance of the remote control is about 3-6 meters. Its operating angle is 30-45 degrees. Keep
the remote control in a safe place. The remote takes 1.x CR2032 which can be accessed by removing the
battery tray at the bottom of the remote.
The buttons on the remote allow the same changes to the settings as the control panel.
Speed Button
Cool Button
Oscillation Button
ON/OFF Button
Timer Button
Mode Button