User Manual

Page 5 of 9
PARTS LIST
Please Note: Both water tanks are part of the main unit, and are not removable.
INSTALLATION
This unit can easily be moved from one room to another. While moving the unit please note that it
must always be kept upright and then placed on an even surface.
 Remove all packaging – while keeping the air cooler in a vertical position.
 Make sure that all parts are present and that the unit is assembled correctly - including the
castor wheels (these need to be pushed into place on the base of the unit)
 Water tank: Fill the top water tank (2) with water ensuring that water tank (1) does not to go
above the MAX level visible on the front of the unit.
 When humidifying, the water level must not be lower than the MIN water line.
 If you want to increase the cooling effect, you can put ice or the charged ice packs into the water
tank (1), but be sure that by adding ice or icepacks the water level does not go over the MAX
limit. Empty some water if necessary via the drain on the back of the unit.
 Make sure that the filter pad is properly inserted into the back of the unit.
 Connect the power plug to a working socket, and then press the power button.
ICE BOX
The ice box can absorb the heat in the water, which in turn can lower the temperature of the water tank.
This can make the air flow cooler.
 Remove the ice box and put it in the freezer until it is totally frozen
 Put the frozen ice box into water tank 1.