Owner`s manual

Treatment. During a treatment, the Force Setting will show the measured

force in real-time.

ARROWS - The Up and Down Arrow Buttons are used to increase and de-

crease the treatment setting values. To edit a value, simply touch it and it

will highlight in BLUE. Then use the arrow keys to enter the desired value.

LUMBAR/CERVICAL - The CERV/LMBR button indicates which distraction

treatment type the table is currently set for.

If your table is equipped for both lumbar

and cervical distraction, pressing the

CERV/LMBR button will toggle between the

two functions respectively. If your Air-Flex

is only equipped with one auto-distraction

option, you will not need to use this button.

MAN/AUTO - Manual/Automatic Button in-

dicates which type of distraction mode

(see below) you want to use. Press the button to toggle back and forth be-

tween MAN and AUTO.

RUN: Pressing RUN starts the treatment. While the system is in run mode

the status display will flash "Run Mode Active" (see below).

8.2 Manual/Auto Mode

Manual Mode (MAN)

Manual Mode allows you to manually distract your patient using the pressure

foot pedal. The Force Setting shows the pounds being administered to

your patient once you release the foot pedal. This force will now be used

as the peak force once the RUN button is pressed.

NOTE: For safety, Manual mode is not available while in Cervical Distraction.

Automatic Mode (AUTO)

Automatic Mode allows the table to automatically distract your patient with

the amount of force you have set. The lumbar default setting is 50 lbs.; the

cervical default setting is 10 lbs. Settings can also be changed before or

during treatment using the up and down arrows.

Run Mode

Once the RUN button is pressed, the treatment

begins and the status display flashes “Run Mode

Active”. While in Run Mode, the system cycles from

Pull to Rest while displaying the actual Force being

distributed in real-time in the FORCE display.