Owner`s manual

ManualsBrandsElectrIQ ManualsAir ConditionerAIRFLEX 15

Table Care

2.1 Cleaning your Table

Hill table upholstery may be cleaned with Hill Laboratories' Vinyl and

Leather Cleaner or any household dishwashing liquid mixed with water. Hill

also offers Protex

™

Disinfectant Spray and wipes to protect against

pathogens, such as MRSA, HIV, Staph and the H1N1 Swine Flu Virus. Many

stubborn stains can be removed by applying 91% rubbing alcohol (isopropyl

alcohol) to the stain and wiping with a dry, soft, lint-free cotton cloth, towel or

soft bristle brush. Be sure to rinse thoroughly with water.

Caution: Some solvents are highly flammable; do not use near open flame

or intense heat. Wear rubber gloves during all cleaning activities. When

cleaning other parts of your table (besides upholstery) use only nonabra-

sive household detergents and water.

Cleaning the LCD Touchscreen

To clean your LCD Screen, DO NOT use common glass cleaners. Apply a

light spray of distilled water or if necessary, a 50/50 mix of white vinegar and

distilled water. Use a very soft cloth (cotton or micro-fiber) and apply it to the

screen with gentle pressure. Do not press hard as this will damage the screen.

2.2 Caution and Symbol Explanation

Caution: Children should never be left alone in a room with the table but

should always be accompanied by an adult.

Caution: Always unplug the table before performing any maintenance.

Caution: Check table once a year to make sure all internal and external

bolts are secure.

Caution: The power cord should be located to avoid risk of tripping or

having objects rolled over or placed on top of it. Damaged cords should

be replaced with another of hospital grade.

Caution: Grounding reliability can only be achieved when connected to an

equivalent receptacle marked hospital only or hospital grade.

Symbols

- Each of the symbols below are used in your table labeling.

An explanation of each is below.

Attention Symbol

consult accompanying

documents

Dangerous Voltage

Symbol

Type BF Applied

Part Symbol

Ground

Symbol

Alternating

Current

Symbol

Don’t Touch

Symbol