Owner`s manual

Auto-Touch Foot Pedal (option)

The Auto-Touch Foot Pedal option maintains upward or downward motion even

after releasing the pedal. To operate:

- When the table is at minimum height, double-touch the “UP” arrow and release.

The table will continue upward until you tap either side of the pedal again.

- When the table is at maximum height, double-touch the “DOWN” arrow and re-

lease. The table will continue downward until you tap either side of the pedal again.

- When the table is at any starting height in between, a single-touch up or down

will start and stop the motion.

3.3 The Control Panel

The Air-Flex control panel (photo 5) has a power button, drop-selector buttons,

and a breakaway, flexion and distraction button. After power, press in any order

to activate the corresponding function. The Flexion, Distraction and Breakaway

functions can be used in any order but must be used independently of one an-

other. See section 5.1”Using Air-Drops” for further instruction.

3.4 Manual Thoracic Release/Thoracic Air-Breakaway

Thoracic Release

To operate the Thoracic Release, pull the lever towards you

while holding the cushion; adjust to the desired

depth. Release the lever to lock the cushion.

Thoracic Air-Breakaway

For tables with a Thoracic Air-Breakaway, it is necessary to regulate the air-

pressure before treating your patient. Follow these steps:

1. Select the ‘BRKY’ (breakaway) button on the main control panel (photo 5).

2. Unlock the thoracic breakaway switch by pulling toward you until it clicks

(photo 4). This will allow the cushion to move freely up and down.

3. Press the right side of the Pressure Pedal (#13, page 2) to increase the

air-pressure or left side to decrease

in the thoracic section. Push down

on the cushion as you add air to test

for desired firmness.

4. Lock the cushion at any point by

pushing the thoracic lock switch to-

wards the table until it clicks.

photo 5