Specifications

VC 5000 (PDF FORMAT) 18 ©Copyright Eaton Corp., 2010. All rights reserved.
5.0 SPARE PARTS STORAGE
5.1 Element Assemblies
5.1.1 Element assemblies must always be stored flat. Stor-
age in the standing position may cause the rims to go
out-of-round.
5.2 Drums
5.2.1 Drums must be stored open end down. Similar to ele-
ment assemblies, storage of a drum in the standing
position will adversely affect roundness.
5.3 Air Actuating Tubes
5.3.1 Air actuating tubes are shipped from the Airflex plant
folded to conserve shipping space. Upon receipt,
remove the tube from its crate and allow it to assume
its natural shape. Store in a cool, dry area, away from
electrical equipment and ultraviolet light.
6.0 ORDERING INFORMATION/
TECHNICAL ASSISTANCE
6.1 Equipment Reference
6.1.1 In any correspondence regarding Airflex equipment,
refer to the information on the product nameplate. If
not available, note the drum diameter, air connection
configuration, mounting arrangement or any other
special features and call or write:
Eaton Corporation
Airflex Division
9919 Clinton Road
Cleveland, Ohio 44144
Tel.: [phone]
Fax: [phone]
Internet: www.eaton.com/airflex
THE PART LISTS ON THE FOLLOWING PAGES APPLY TO STANDARD ELE-
MENT ASSEMBLIES ONLY. ELEMENTS USED ON SLIP OR HIGH-TORQUE
APPLICATIONS WILL HAVE DIFFERENT COMPONENT PARTS.
CONSULT THE AIRFLEX FACTORY OR AN AUTHORIZED AIRFLEX DISTRIBU-
TOR PRIOR TO ORDERING REPLACEMENT PARTS FOR ANY ELEMENT NOT
APPEARING ON THE FOLLOWING LISTS.