Specifications

Figure 3

2.1.2 Figure 4 illustrates the gap-mounting arrangement

with an axial locking device. The axial locking device

restricts the relative axial motion between the driving

and driven shafts. This arrangement is typically used

where a synchronous motor armature with plain

bearings must be held on magnetic center.

2.1.3 Figure 5 illustrates a typical VC brake application. The

drum and drum hub are attached to the shaft which is

to be stopped. The element is attached to a rigid reac-

tion bracket.

Figure 4

Figure 5

2.1.4 Figure 6 illustrates a typical marine main propulsion

application. In this arrangement, the element is

attached to a pinion adapter plate and the drum and

drum hub are attached to a quill shaft. A manifold is

attached to the outboard end of the element for bear-

ing support of the quill shaft.

Figure 6

Outboard

Element

Drum Hub

Spider

Drum

Outboard

Element

SINGLE NARROW & SINGLE WIDE

DUAL NARROW

DUAL WIDE