Manualshelf

User Manual

ManualsBrandselectriQ ManualsAir Conditioning12 Inch Low Energy Quiet DC Pedestal Floor and Table Fan with Remote Control Timer and Oscillation Functions
1234567
Page 5 of 7
OPERATION
SWING BUTTON
Press to start the swing function. The fan
will slowly turn from side to side. The
swing button light will turn on. Press the
button again to turn off the swing
function.
TIMER BUTTON
Press to start the timer function. Each
press will increase the timer by 1 hours.
The timer function can be set between 1
and 7 hours.
ON OFF/ FAN SPEED BUTTON
Press the button once to turn on the fan.
When the fan is on, press the button
repeatedly to cycle through the fan
speeds, you can choose between speeds
1-6, when the speed is 4, the indicator
will display 1-3. Press and hold the
button to turn off the fan.
REMOTE CONTROL
Your fan is supplied with a remote, which allows full control of all the units
functions. The Buttons on the remote have the same functions as the buttons
on the main control panel.
REPLACING THE BATTERIES
The remote control is powered by a Lithium Button Cell Battery (CR2025). Should the
remote become unresponsive, replace the battery following the instructions below:
1. Turn over the remote and press tab A to the right.
2. Slide out the battery tray B.
3. Replace the battery with the same type, ensuring the positive side is facing upwards.