User Manual

Page 6 of 7
MAINTENANCE
ATTENTION: Turn off the unit and unplug from the mains before cleaning or performing any
maintenance.
CLEANING THE SURFACE
• Clean the fan with a duster or a soft wet cloth.
• Do not submerge any part of the fan.
• Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause
irreversible damage. Make sure no water enters the control panel or fan motor.
• Do not run the unit until completely dry.
• Place the fan in its original box or cover the fan to protect it from dust.
• Store the fan in a cool dry place.
TROUBLESHOOTING
Do not repair or disassemble the unit by yourself, unauthorized repair attempts will invalidate the
warranty and may cause bodily harm.
Issue
Possible Reason
Solution
No power
1. Power cord is unconnected
2. There is no power from socket
3. The power switch is not on.
1. Connect the power cord
2. Check socket is turned on
3. Turn the unit on
Odour emission
from unit
1. New unit. When the unit is used for
the first time the fan motor may
produce and odour which will dissipate
within a week of use
1. No action required
Strong
vibrations and
noise
1. Fan is not used on a flat surface
2. Fan may be damaged
1. Place on a flat surface. May put
an anti-vibration mat underneath
2. If fan is damaged discontinue
use and contact service centre.
If the above solutions do not resolve the problem please contact the supplier.