USER MANUAL DF24B 24 INCH HIGH VELOCITY MOBILE FAN Thank you for choosing ElectriQ Please read this user manual before using this air circulator and keep it safe for future reference. Visit our page www.electrIQ.co.
CONTENTS SAFETY INSTRUCTIONS 3 FEATURES AND ASSEMBLY 4 CONTROL PANEL AND SETTINGS 5 MAINTENANCE 6 TROUBLE SHOOTING 6 APPENDIX 7 2
SAFETY INSTRUCTIONS Important! • Carefully read the instructions before operating the unit • This appliance is for indoor use only. • Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. • Installation must be in accordance with regulations of the country where the unit is used. • If you are in any doubt about the suitability of your electrical supply have it checked and, if necessary, modified by a qualified electrician. • This fan has been tested and is safe to use.
DF24B 24 Inch Mobile High Velocity Cool Air Circulator Fan with 3 Speed Settings SPECIFICATIONS ⚫ ⚫ ⚫ ⚫ High air flow 7000 m³/hr (5,600cfm) Slim design takes minimal space High Speed Motor with 3 Fan Speed Settings Adjustable Tilt Head PARTS LIST Main Body Frame Assembly Wheel x 2 Mounting Bracket Axle Cap Nut 2 Axle Rod Screws x 6 Handle Fixing Knobs x 2 4
FAN ASSEMBLY 1. Place the mounting bracket in position on the left hand side of the Frame Assembly, and fasten using one screw at either end to secure it in place. 2. Slide the Axle rod through the Mounting Bracket, before attaching a wheel to either end of the Axle using an Axle Cap Nut at each end to secure them. 3. Place the assembled stand flat on the floor, stood on its wheels, with the wheels to the left. 4.
OPERATION 1. Set your fan on a level dry surface. 2. Before plugging into the wall outlet adjust the fan head to your desired angle: loosen the mounting screws then tighten them back in position. 3. Plug the power cord into a standard 220~240 V wall outlet. CONTROL PANEL AND SETTINGS Twist the control knob from the 0 and select the appropriate speed Low (1) Medium (2) High (3) INSTALLATION This unit can easily be moved from one room to another.
MAINTENANCE CLEANING AND STORAGE ATTENTION: Please shut off the unit and unplug from the mains before cleaning or performing any maintenance. Cleaning the surface Clean the grills with a duster or a soft wet cloth. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage. Make sure no water enters the control panel or fan motor Do not run the unit until completely dry. Place the fan in its original box or cover the fan to protect it from dust.
TECHNICAL DATA: Model Fan Speed Blade size Cable length Rated Input Running Current Air Flow Noise Power Supply Net Weight Gross Weight Net Size (assembled) Gross Size (packed) DF24B High Velocity 3 600 mm 1.5 meters 160 Watt 0.68 Amps 7000 m3/hr (5600 CFM) Max 65db 230V/50Hz 9 kg 10.
electriQ UK SUPPORT www.electriQ.co.uk/support Call: 0330 390 3061 or complete the online form Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA Disposal: Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products.
