User Manual

9
While the unit is heating, the thermometer symbol will flash.
When the room temperature is above the desired temperature the thermometer
symbol will be illuminated constantly.
TIMER BUTTON
The in-built timer will allow you to set the unit to turn on or turn off after a set period
of time, Please note only one timer can be used at any time.
ON TIMER
– The timer will turn on the unit automatically after the time set has
elapsed.
1. With the unit turned off, press the TIMER button, then set the number of
hours’ time you desire the unit to start by repeatedly pressing the TIMER
button.
2. Once the set time has elapsed, the unit will turn on automatically.
3. Press the POWER button before the time has elapsed and the unit will turn on
as normal and the timer will be cancelled
OFF TIMER
– The timer will turn off the unit automatically after the time set has
elapsed.
1. While the unit is operating, press the TIMER button then set the number of
hours’ time you desire the unit to stop by repeatedly pressing the TIMER
button.
2. Once the set time has elapsed, the unit will enter standby automatically.
3. Press the POWER button before the time has elapsed, the timer will be
cancelled and the unit will turn off.
MODES AVAILABLE FOR SETUP
The heater has two different setup modes, Quick Connection and AP (Access Point).
The quick connection is a quick and simple way to set the unit up. The AP connection
uses a direct local Wi-Fi connection between your phone and the heater to upload the
network details.
When first turned on using the switch on the rear of the unit, the power indicator will
flash rapidly, showing that the unit is in Quick connection mode, and ready to set up.
Please ensure your device is in the correct Wi-Fi connection mode for the connection
type you are attempting, the flashing of the power indicator on your heater will indicate
this.
Connection Type
Frequency of Flashes
Quick Connection
Flashes twice per second
AP (Access Point)
Flashes once per second
CHANGING BETWEEN CONNECTION TYPES
With the appliance in standby (Power switch on and unit turned off), quickly alternate