USER MANUAL OIL FILLED RADIATOR DragonPlus7-1.5W DragonPlus7-1.5WB DragonPlus9-2.0W DragonPlus9-2.0WB DragonPlus11-2.5W DragonPlus11-2.5WB Thank you for choosing electriQ Please read the manual before using this heater and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire product range THIS PRODUCT IS ONLY SUITABLE FOR WELL INSULATED SPACES OR OCCASIONAL USE.
CONTENTS SAFETY INSTRUCTIONS 3 PRODUCT OVERVIEW 5 DISPLAY 6 CONTROL PANEL 7 REMOTE CONTROL 7 OPERATION 8 CONNECTING THE APPLIANCE TO WIFI 9 CONTROLLING YOUR APPLIANCE THROUGH THE APP 15 SETTING THE TIMER 19 MAINTENANCE 20 TROUBLESHOOTING 20 TECHNICAL DATA 21 SUPPORT 21 PRODUCT FICHE 22 2
SAFETY INSTRUCTIONS IMPORTANT • • • • • • • • • • • • • • • • • • • • • Carefully read the instructions before operating the unit This appliance is for indoor use only. Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. Installation must be in accordance with regulations of the country where the unit is used. If you are in any doubt about the suitability of your electrical supply have it checked and, if necessary, modified by a qualified electrician.
• Do not use an external timer. • Do not cover the appliance, or place items close to the unit which may restrict airflow, as this may present a fire risk. • The heater must not be located immediately below a socket outlet. • Always place the unit on a dry and stable surface. Do not move or tilt the unit. • Avoid keeping the unit in direct sunlight for a long period of time. • The heater is designed to be used at temperatures above -20°C.
PRODUCT OVERVIEW 1. Handle 2. Digital display screen 3. Control panel 4. Power switch 5. Cord storage with hook 6.
ACCESSORIES Mounting Plate x2 U-Shaped Bolt with Butterfly Nut x 2 Remote Control Castor x 4 ASSEMBLY INSTRUCTIONS • • • • • Remove the butterfly nuts from each of the U-shaped bolts. Place the first U shaped bolt around the base of the radiator and slide the hooked end of the bolt into one of the inner holes on the mounting plate. Fasten the other end of the bolt to the other inner hole using the butterfly nut. Repeat with the other mounting plate and U-shaped bolt.
DISPLAY SCREEN LOW HEAT LEVEL TIMER MEDIUM POWER HIGH CONTROL PANEL The unit can be operated using the remote control or the control panel on the side of the unit.
REMOTE CONTROL The buttons on the remote allow the access to the same settings as the main control panel. Change the heat level between Low, Medium and High On / Off Button Increase desired Temperature Decrease desired Temperature Set the Standby / Start Timer OPERATION Turning ON/OFF • Press the power switch on the side of the unit to the "ON" position to power the unit. The power symbol will illuminate on the display. • Press the "ON/OFF" button on the control panel or remote control.
While the unit is heating, the thermometer symbol will flash. When the room temperature is above the desired temperature the thermometer symbol will be illuminated constantly. TIMER BUTTON The in-built timer will allow you to set the unit to turn on or turn off after a set period of time, Please note only one timer can be used at any time. ON TIMER – The timer will turn on the unit automatically after the time set has elapsed. 1.
between pressing the + and – buttons until the unit bleeps, as soon as the unit bleeps keep the last button pressed down until the speed the Wi-Fi light flashes changes. Please note this may take a few attempts. TURNING WIFI OFF With the appliance in standby mode (Power switch on, but turned off), Press and hold the On Off Button for 3 seconds. The unit will bleep and the Light button will go out. TURNING WIFI ON Turn the appliance off using the switch.
REGISTER THE APP 1. Press on the register button at the bottom of the screen. 4. A verification code will be sent by the method selected in step 3. Enter the code into the app. 2. Read the Privacy policy and press the Agree Button. 5. Type in the password you would like to create. This needs to be 6-20 characters, with letters and numbers. 11 3. Enter your email address or phone number and press continue to register. 6. The app is now registered.
SETTING UP YOUR HOME WITHIN THE APP TUYA is designed so it can work with a large number of compatible smart devices within your home. It can also be set up to work with multiple devices within different houses as such during the setup process, the app requires that different areas are created and named to allow easy management of all your devices. When new devices are added, they are assigned to one of the rooms you have created. CREATING ROOMS 1. Press on the ADD HOME button. 2.
CONNECTING USING THE QUICK CONNECTION METHOD Before initiating the connection, make sure the unit is in standby mode (Power switch ON, but unit turned off), with the power indicator flashing twice per second. If not follow the instructions for changing the connection mode. Also ensure your phone is connected to the Wi-Fi network. (We advise turning mobile data off during setup) 1. Open app and press “+” to add device, or use the add device button 4. Enter your Wi-Fi password and press confirm. 2.
CONNECTING USING APP MODE ALTERNATIVE METHOD Before initiating the connection, make sure the unit is in standby mode, with the power Indicator flashing once per second. If not follow the instructions for changing the WiFi connection mode. Also ensure your phone is connected to the Wi-Fi network. (We advise turning mobile data off during setup) 1. Open app and press “+” to add device, or use the add device button 4.
CONTROLLING YOUR APPLIANCE THROUGH THE APP THE HOME SCREEN Each device has its own entry on the home screen to allow the user to either quickly turn the unit on or off, or to enter the device screen to make other changes. Voice Control: Press to give verbal instructions for operation. Add Device: Add a device to the app, and go through the setup process.
DEVICE SCREEN The device screen is the main control screen for the heater, providing access to the controls to amend the functions and settings. Back: Returns to the Home Screen Device Name Edit Name: Use to change the name of the heater Current Mode: Shows the mode the heater is currently working in. Desired Temperature: Displays what has been set as the target room temperature.
SMART SCENES Smart Scenes is a powerful tool providing the option to customize the operation of the air heater based both on conditions within the room and outside influences. This gives the user the option of specifying much more intelligent actions. These are split into two categories Scene and Automation. TAP TO RUN Scene allows for a one touch button to be added to the Home Screen. The button can be used to change a number of settings in one go, and can change all the settings within the unit.
AUTOMATION Automation allows an automatic action to be set up for the device. This can be triggered by the Time, and a range of other influences, depending what other TUYA enabled devices you have on the network. 1. Press on the Scene tab at the bottom of the Home screen 2. Press on the Automation tab at the top of the screen. 4. Setup is very similar to the scene setup on the previous page, and includes an extra section for specifying a trigger for the scene to start.
SETTING THE UNIT TO WORK ON A TIMER The automation feature within TUYA can be used to set up timed operation, this is done through the automation within SMART SCENES. Follow the steps on the previous page, on the “SET A CONDITION” screen, set the condition as schedule, choose the time and days you require the unit to turn on. Then press next and In the “SET UP A TASK” screen, choose the appliance, then the option to power the unit on, and the other settings required.
MAINTENANCE CLEANING AND STORAGE ATTENTION: Please shut off the unit and unplug from the mains before cleaning or performing any maintenance. CLEANING THE SURFACE • Clean the heater with a duster or a soft wet cloth. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage. Make sure no water enters the control panel or gaps in the casing. • Do not run the unit until completely dry.
TECHNICAL SPECIFICATION Model DragonPlus7-1.5W(B) DragonPlus9-2.0W(B) DragonPlus112.5W(B) Voltage 220V-240V 220V-240V 220V-240V Frequency 50Hz 50Hz 50Hz Minimum heating capacity (indicative) 0.6kW 0.8kW 1.0kW Maximum continuous thermal power 1.5 kW 2.0kW 2.5kW DECLARATION OF CONFORMITY Hereby, electriQ declares that this heater is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.
PRODUCT FICHE Model Identifier: DragonPlus7-1.5W / DragonPlus7-1.5WB Item Symbol Value Unit Heat Output Item Unit Type of heat input, for electric storage local space heaters only (select one) Nominal heat output Pnom 1.5 kW manual heat charge control, with integrated thermostat No Minimal heat output Pmin 0.6 kW manual heat charge control with room and/or outdoor temperature feedback No Maximum continuous heat output Pmax 1.
Model Identifier: DragonPlus9-2.0W / DragonPlus9-2.0WB Item Symbol Value Unit Heat Output Item Unit Type of heat input, for electric storage local space heaters only (select one) Nominal heat output Pnom 2.0 kW manual heat charge control, with integrated thermostat No Minimal heat output Pmin 0.8 kW manual heat charge control with room and/or outdoor temperature feedback No Maximum continuous heat output Pmax 2.
Model Identifier: DragonPlus11-2.5W / DragonPlus11-2.5WB Item Symbol Value Unit Heat Output Item Unit Type of heat input, for electric storage local space heaters only (select one) Nominal heat output Pnom 2.5 kW manual heat charge control, with integrated thermostat No Minimal heat output Pmin 1.0 kW manual heat charge control with room and/or outdoor temperature feedback No Maximum continuous heat output Pmax 2.
