USER MANUAL ELECTRIC SCOOTER E-SC10 Thank you for choosing electriQ Please read the manual before using this scooter and keep it safe for future reference. Visit our page www.electriQ.co.
CONTENTS SAFETY WARNINGS 3 SCOOTER DIAGRAM 5 ASSEMBLY 6 FOLDING AND UNFOLDING THE SCOOTER 7 DISPLAY OVERVIEW 8 FIRST USE 9 HOW TO RIDE 9 MAINTENANCE 9 STORAGE 10 TECHNICAL SPECIFICATIONS 10 SUPPORT 11 2
SAFETY WARNINGS • Carefully read the user manual before use to avoid the risk of injury. Keep the • • • • • • • • • • • • • • • • • • • • • • user manual safe for future reference. The scooter can only be used by people aged 14 years old and over.
BATTERY SAFETY • The scooter comes supplied with a lithium battery. Care must be taken with the battery and charging to maintain its lifespan. • Do not expose the scooter or battery to naked flames or extreme heat. • Do not expose the scooter or battery to extreme cold. • Do not allow moisture to enter the battery compartment or charging port. • Only use the provided charger. • Do not overcharge the battery or leave unattended whilst charging. • The battery must be removed if disposing of the product.
SCOOTER DIAGRAM Handlebar Stem Handlebar Buckle 5
ASSEMBLY Ensure that the mini scooter is fully assembled before operating. Step on the deck of the unit and lift the handlebar stem firmly to detach from the deck. Remove the rubber plugs on both sides of the front wheel forks, then unfasten the front axle with the two 6mm wrenches provided. When installing the front wheel pay attention to the direction of the tread, ensuring it matches the image with the valve on the right.
HANDLE ASSEMBLY Fully tighten the handlebars on to each side of the handlebar stem, Ensuring that the right handle is attached to the right side, and the left handle is attached to the left. UNFOLDING YOUR SCOOTER Lift up the handlebar stem until the folding hook releases from the hook hole on the back fender. Fully raise the handlebar stem, then Lock the handlebar stem into place using the handlebar buckle. Ensure a clicking sound is heard and that the buckle is secure.
DISPLAY OVERVIEW POWER BUTTON Press and hold for 3 seconds to turn the scooter ON or OFF. HEADLIGHT Press the power button twice to turn on the headlight. Turn it off by pressing the power button twice. The headlight symbol will illuminate on the display when the lights are on. MODE BUTTON When the scooter is on, press the MODE button to change between the speed modes: Low speed, Medium speed and high speed. The currently selected mode will be shown by the colour of the speed symbol.
FIRST USE IMPORTANT: Before using the scooter for the first time, fully charge the battery. After turning on the scooter, check the battery power on the display and verify that all lights are working. • Remove the protective cover from the charging port on the scooter. • Ensure that the charging port is dry and not damaged before inserting the charger into the port. (Refer to the scooter diagram for location). • When the indicator on the charger is red, the scooter is charging.
STORAGE • To protect the battery, ensure it is charged for at least an hour before storage. If you plan on storing the scooter for a prolonged period, the scooter should be charged every 2 months to avoid deterioration of the battery. Do not store the scooter at less than 7⁰C or above 25⁰C • Keep the scooter inside its own packaging, or cover it to prevent dust build up. • Keep the scooter indoors at all times when not in use.
electriQ UK SUPPORT. 0330 390 3061 Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA PRODUCT DISPOSAL Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products.
V20200819
