User Manual

Page 13 of 22
CONNECTING USING THE QUICK CONNECTION METHOD
Before initiating the connection, make sure the unit is in standby mode (Power switch ON, but
unit turned off), with the WiFi indicator flashing twice per second. If not follow the
instructions for changing the connection mode. Also ensure your phone is connected to the
WiFi network. (We advise turning mobile data off during setup)
2. Select the type of device
as “Heater” within the Home
Appliance tab.
3. Ensure the WiFi indicator on
the heater is flashing twice per
second，then press on the
orange button at the bottom of
the screen.
5. This will then transfer the
settings to the heater. Wait for
this to complete. If this fails,
retry. If still unsuccessful
please review the
troubleshooting section for
further help.
1. Open app and press “+” to
add device, or use the add
device button
4. Enter your Wi-Fi password
and press confirm.