User Manual

Page 19 of 22
SETTING THE UNIT TO WORK ON A TIMER
The automation feature within TUYA can be used to set up timed operation, this is done through
the automation within SMART SCENES. Follow the steps on the previous page, on the “SET A
CONDITION” screen, set the condition as schedule, choose the time and days you require the unit
to turn on. Then press next and In the “SET UP A TASK” screen, choose the appliance, then the
option to power the unit on, and the other settings required. Once the ON time is set, repeat the
steps to set when the unit will turn off.
PROFILE TAB
The profile tab gives you the option to edit both your detail,
and use the added features of the unit.
HOME MANAGEMENT
Home Management proves options for managing your TUYA
account, giving options such as adding a home, adding and
removing rooms, and sharing devices with family.
MESSAGE CENTRE
View notifications from devices, if alarms are set up
(dependent on device)
HELP CENTRE
Provides assistance using the features provided within the
app
MORE SERVICES
This allows the unit to be integrated with your favorite home
automation hardware such as Google Home and the Amazon
Echo.
CONNECTION TROUBLESHOOTING
1. Check whether the device is powered on and is in the correct Wi-Fi connection mode, if
not please refer to the CHANGING BETWEEN CONNECTION MODES section.
2. Ensure the Wi-Fi password has been entered into the app correctly (Case sensitive)
3. Check that the phone is connected to the Wi-Fi you are connecting the device to.
4. Ensure the network you are connecting it to is 2.4Ghz (5Ghz Wi-Fi networks are not
supported), and that there is a strong Wi-Fi signal to the item.
5. If your router is dual band, ensure that the 2.4ghz network has a different network name
(SSID). Further advice on changing router settings will be available from your Internet
service provider / Router manufacturer.
6. Check the settings on the router. Encryption should be WPA2-PSK and authorisation type
should be set to AES
7. Try using the alternative connection method. i.e. If connection is failing when attempting
to connect through CF mode, try AP mode.