USER MANUAL EAP100D Ultra-Quiet Air Purifier with room temperature and humidity display and three stage filtration Thank you for choosing this innovative electriQ Air Purifier. Please read this user manual before using the product and keep it safe for future reference. Visit our page www.electriQ.co.
CONTENTS SAFETY INSTRUCTIONS 3 INDOOR POLLUTANTS 4 PRODUCT OVERVIEW 5 CONTROL PANEL 7 OPERATION 7 CARE AND MAINTENANCE 8 TECHNICAL DATA 9 TROUBLESHOOTING 9 SUPPORT 10 2
SAFETY INSTRUCTIONS Important! • Carefully read the instructions before operating the unit. • This appliance is for indoor use only. • Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. • Installation must be in accordance with regulations of the country where the unit is used. • If you are in any doubt about the suitability of your electrical supply have it checked and if necessary, modified by a qualified electrician.
The EAP100D provides 3 stages air purification using professional air filtration and sterilisation. • Advanced activated carbon filter - removes unpleasant odours and absorbs harmful substances as formaldehydes and benzenes • Antibacterial True HEPA filter - to remove 99.98 % of airborne particles of 0.25 micrometres or larger Plasma Ioniser - sterilizes even further and removes mould spores and allergens from the air.
PRODUCT OVERVIEW Clean air outlet Filter cover HEPA and activated carbon cartridge Power cord connector Air inlet Power cord and power adapter 5
INSTALLING AND REPLACING THE FILTERS Note: For convenience HEPA and activated carbon filter are combined in one easy, replaceable filter cartridge. High performance filters are not washable, keep them dry at all times and vacuum regularly.) 1. Unplug the device from the mains. 2. Turn the unit upside down 3. While holding the base of the unit twist the filter cover anti-clockwise to gain access to filter chambers 4. Ensure the plastic wrap is removed from the filter prior to installation. 5.
CONTROL PANEL Temperature Humidity Display Fan speed Filter status Plasma ioniser Fan speed Button On / Off Button OPERATION Ensure the filter cartridge is correctly installed (with the plastic packaging removed) Plug in the unit Press the Power On / Off button to start the device. The air purifier will display the room temperature, fan mode and the filter status. The 2 digits led screen is able to display both room temperature and humidity.
FAN SPEED: Press the FAN SPEED button to cycle between maximum air purification at high speed and slower, quieter operation at low fan speed. SLEEP MODE: Press and Hold the fan button for 3 seconds to put the unit in Sleep mode. Only the power light will be illuminated and the appliance will work at low fan speed. This can ensure continuous operation even overnight. Touch any button to return the unit to standard operating mode.
TECHNICAL DATA Model EAP100D Fan Speed Low High Airflow (m3/hr) 10 20 Noise level (dB) 18 35 Power rating 5 Volts, 2.5 Watts 5x106 ions/cm3 Ions Power cord length 1.5 meters Net Size (w x d x h) 11.5x11.53x20.5 cm Net Weight 0.6 kgs PSU Voltage 220-240 V, 50 hz Efficiency Particle Size Life Time 99.9% ≤0.
APPENDIX Disposal: Do not dispose this product as unsorted waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating sites run by their local councils.
