User Manual

TECHNICAL DATA

TROUBLESHOOTING

The Air purifier does not

work

• Is the power adaptor disconnected from the wall socket?

• Is the power adaptor connected to the rear of the unit?

• Is the socket switched on?

• The base cover may not be installed correctly, try to remove and

reinstall.

No clean air is delivered

or performance is poor

• Ensure the filters are clean and the packaging was removed from

the filter cartridge.

• Ensure that the filter cartridge is installed.

• Set the unit to high fan speed.

• Investigate if the air purifier is used in a room matching its size

and enough operation time is allowed for larger rooms.

Abnormal noise during

operation

• Check if the packaging from the filter cartridge was removed

during the filter change.

• Air inlet or outlets may be blocked. Remove any obstruction and

try again.

• Ensure the unit is on a flat solid surface.

If the troubleshooting section fails to resolve your issue contact the electriQ support centre for

further assistance.

MODEL

EAPDC150HCST

POWER SUPPLY

DC 24V/1A

AIR FLOW VOLUME (M

/H):

≥ 106M

NET WEIGHT:

1.6KG

NOISE LEVEL DB(A):

≤38DB(A)

POWER CONSUMPTION (W):

16W

DIMENSIONS (WXDXH)：

Φ180XH282(MM)

NEGATIVE IONS：

≥ 5.0X10

IONS/CM