User Manual

14
CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing once
per second. If not follow the instructions for changing the WIFI connection mode. Also ensure your
phone is connected to the WIFI network. (We advise turning mobile data off during setup)
2. Open the app and press “+”
to add device
2. Select the type of device
as “Air Conditioner” within
the Large Home Appliance
tab.
3. Press on the AP mode
button in the top right of
the screen.
4. Ensure the WIFI light on the
air conditioner is slowly
flashing (once per three
seconds), then press on the
orange button at the bottom
of the screen to confirm
5. Enter your WIFI password
and press confirm.
6. Go to network settings in
your phone and connect to
the “SmartLife xxx”
connection. There is no
password to enter. Then
return back to the app to
complete setup.
This will then transfer the settings to the air conditioner.
Once the connection process has completed, go back to the network settings on your phone to
ensure your phone has reconnected to your WIFI router.