USER MANUAL 15.
CONTENTS SAFETY 3 PRODUCT OVERVIEW 4 OPERATION 5 MAIN MENU 5 CONNECTING A DEVICE 7 TROUBLESHOOTING 9 TECHNICAL INFORMATION 10 SUPPORT 11 CLEANING AND MAINTENANCE 11 2
SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The manual should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Do not use this equipment near water – The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool. • Clean only with a dry cloth.
PRODUCT OVERVIEW 15.8 Inch Speaker Speaker Secondary USB Type C (Power Only) HDMI Input Rocker Switch Main USB Type C Input (Power and Video ) Power/ Return button 3.
OPERATION Press and hold the power button for 3 seconds to turn the monitor ON and OFF. The screen will enter power saving mode when turned on unless there is a suitable device connected. The ROCKER SWITCH is used to increase or decrease the volume and adjust the brightness. Roll the switch up or down to adjust the settings. To change between brightness and volume press the switch. MAIN MENU The portable display also includes a full settings menu which is navigated using the rocker switch.
COLOR TEMP COLOUR TEMP – Change between USER, WARM and COOL. In USER the individual RED, GREEN and BLUE values can be adjusted. OSD SETTING LANGUAGE – Change the language of the Menus. OSD TIMER – Adjust the amount of time the menu is shown before the display returns to normal operation. TRANSPARANCY – Adjust how see through the menus are. RESET RESET – Return the portable display to factory settings. MUTE – Turn the sound On or Off Volume – Adjust the volume level between 0 and 100.
CONNECTING A DEVICE COMPUTER – VIA USB TYPE C The portable display can be connected to a compatible computer using the supplied USB C cable. This must be connected to the Main USB socket on the left of the display. The computer will provide power and signal to the monitor and can be used for extended display or duplicated display use. COMPUTER – VIA HDMI When connecting to a compatible computer using the HDMI interface, you need to connect the supplied HDMI cable between the computer and the display.
MOBILE PHONE – VIA USB TYPE C When there is no external power supply connected to the secondary USB Type C socket on the right of the display, the mobile phone battery will supply power to the display. To reduce power usage the energy-saving mode will be activated and the display brightness will be reduced to 30%, and the user can adjust the brightness and volume of the display according to the output power of the mobile phone).
TROUBLESHOOTING PROBLEM No video/ picture (led not lit) No video/ power/ picture (led lit) Missing pixels/ spots and light leaks on the screen Display fails when switching Picture is missing colours Screen image is too small Osd does not appear on the screen No picture, indicator light is blue The picture does not fill the entire screen. SOLUTION • Make sure the video cable between the monitor and computer is connected properly and securely.
TECHNICAL INFORMATION Product type: Visual area: Panel type: Aspect ratio: Portable Display 349.63 (H) *196.67mm IPS 16:9 Model No: Screen Size: Dimension: Resolution: Colour temperature: V:85°/85°Min Brightness: eiQ-15FHDPM-V2 15.8 inch 368 * 225 * 9.0 mm 1920*1080 Display color: 16.7M 6800K H:85°/85°Min 800:1 200-220 cd/m² 72% Mini HDMI (Video signal) 、Type C(Video data、Power supply Input interface: ISDN)、Type C power supply 3.
CLEANING AND MAINTENANCE Before cleaning the monitor, unplug the monitor power cord from the electrical outlet • When cleaning the antistatic screen, slightly moisten a clean, soft cloth with water. If possible, use a dedicated screen-cleaning tissue or solvent for electrostatic coating. • Do not use benzene, thinner, ammonia, abrasives, or compressed air. • If you find white powder when you unpack your monitor, wipe it off with a cloth.