USER MANUAL 27” SLIM LED MONITOR eiQ-27MF75I Thank you for choosing electriQ Please read the user manual before using this monitor and keep it safe for future reference Visit www.electriQ.co.uk to view our entire range of Intelligent Electricals.
CONTENTS Safety Information 2 What’s Included 4 Monitor Dimensions 4 Connections Available on the Monitor 4 Wall Mounting 4 Getting Started 5 Monitor Controls 5 Initial Setup 5 Menu Options 5 Luminance Settings 6 Image Setup Settings 7 Color Setup Settings 8 OSD Setup Settings 9 Reset 10 Extra 11 Specification 12 electriQ UK Support 13 1
SAFETY INFORMATION • • • • • • • • • • • • • • • • • • • • • • Read these instructions - All the safety and operating instructions should be read before this product is operated. Keep these instructions - The safety and operating instructions should be retained for future reference. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions - All operating and usage instructions should be followed.
• • • • • Trying to service the unit yourself is dangerous and may invalidate the product's warranty. Only qualified personnel should service this apparatus. Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2") clearance all around. Do not tap or shake the screen, this may damage internal components.
WHAT’S INCLUDED CONNECTIONS AVAILABLE ON THE MONITOR 1. HDMI port: Used to connect a compatible device. Supports HDMI 1.4 & 2.0; 2. VGA: The VGA Input Source. 3. Audio Output Port: Used for connecting headphones, or external speakers 4.
GETTING STARTED MONITOR CONTROLS M Enter into OSD menu and select an item for confirming settings Move down/ reduce value in the OSD menu; Display HDR Menu Move up / reduce value in the OSD menu; Display LOS (Crosshairs) E Go back to previous menu, exit the on-screen display, and display source menu. POWER Turn the monitor on and off. INITIAL SETUP Connect the monitor to a power outlet. 1. Press the POWER button on the monitor or to turn it on (The indicator will be blue) 2.
BRIGHTNESS SETTINGS BRIGHTNESS Allows the adjustment of the image brightness, according to ambient light in the room. Value “0-100” CONTRAST Allows the adjustment of contrast between white and black areas of the image. Value “0-100” ECO MODE Allows selection of image settings between the following: STANDARD, TEXT, MOVIE, and GAME, FPS, RTS”. DCR Allows the dynamic contrast of the picture to be turned ON and OFF IMAGE SETUP SETTINGS H.
COLOUR SETUP SETTINGS COLOR TEMP. Allows adjustment of the colour settings between the following options: “Warm-5800-SRGB-User-Cool7500”.
RESET AUTO CONFIG. Auto adjusts the image. AUTO COLOR Auto adjusts the colour of the image. RESET Returns the monitor to its factory default settings. EXTRA INPUT SELECT Allows user to choose the signal source of the display “HDMI, VGA”. MUTE Allows Mute to be turned ON and OFF VOLUME Allows adjustment of the volume of the monitor from “0-100”. .
SPECIFICATION eiQ-27MF75I Panel Type 27'' Case Type Plastic Best Resolution 1920(H) x 1080(V) Active Display Area 597.8 (H) X 336.3 (V) Pixel Pitch 0.3114 (H) x 0.3114 (V) Contrast Ratio 1000:1 Typical Brightness 250 cd/m² Response Time 5ms(G2G) Viewing Angle U/D: 89° / 89°, L /R: 89° / 89° Display Colours 16.
TROUBLESHOOTING Problem No power No picture Solution Insert the plug securely into the power outlet. Ensure that the equipment is connected properly. Ensure the correct input is selected. Buttons on the monitor don’t do Disconnect the power plug and then reconnect it. (The unit anything may not be operating properly due to lightning, static, or other factors.) Noise or other interference Electronic equipment near the unit may be causing interference. Relocate the unit or move the equipment.
