USER MANUAL 30” CURVED LED MONITOR eiQ-30CVWF200VAFSGH Thank you for choosing electriQ Please read the user manual before using this monitor and keep it safe for future reference Visit www.electriQ.co.
CONTENTS Safety Information 2 What’s Included 4 Monitor Dimensions 4 Connections Available on the Monitor 5 Wall Mounting 5 Shortcut Key Guide 6 Initial Setup 6 Menu Options 6 Input Source 7 Brightness/Contrast 7 Color Settings 8 Picture Quality Settings 8 Display Settings 9 Audio Settings 9 Multi-Window 10 OSD Setting 10 Other Settings 11 Specification 12 Troubleshooting 13 2
SAFETY INFORMATION • • • • • • • • • • • • • • • • • • • • • Read these instructions - All the safety and operating instructions should be read before this product is operated. Keep these instructions - The safety and operating instructions should be retained for future reference. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions - All operating and usage instructions should be followed.
• • • • • • • • Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product's warranty. Only qualified personnel should service this apparatus. Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2") clearance all around. Do not tap or shake the screen, this may damage internal components.
WHAT’S INCLUDED USER MANUAL POWER SUPPLY POWER CABLE 4 HDMI
CONNECTIONS AVAILABLE ON THE MONITOR 1. 1POWER 2. 2USB (Firmware updates) 3. 3 HDMI 2 (HDMI 1.4, 75Hz, Free Sync) 4. 4 HDMI 1 (HDMI 2.0, 144Hz, Free Sync) 5. 5 DP (Display Port 1.2, 144Hz, Free Sync) 6. 6 AUDIO OUT WALL MOUNTING • The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied).
SHORTCUT BUTTONS The monitor includes one touch options to access common settings. Display the signal source menu. Use the ◄and► buttons to navigate and the M button to select the source. Activate the Line of Sight feature. Press again to cycle between the colours or turn off. Activate the ECO Mode feature. Press again to cycle through the presets. INITIAL SETUP Connect the monitor to a power socket. 1. Press the POWER button on the monitor or to turn it on (The indicator will be blue). 2.
OSD MENU INPUT SOURCE Signal Switch the signal input or select the source. DP, HDMI1, HDMI2 BRIGHTNESS/CONTRAST Brightness Adjust the brightness of the display between 0 and 100. Contrast Adjust the contrast of the display between 0 and 100. DCR Turn the Dynamic Contrast Ratio Feature On or Off.
COLOR SETTINGS Gamma Change the Gamma value for the display between 2.0/ 2.2/ 2.4. Picture Mode Change the picture mode between Standard, Photo, Movie, Game, FPS and RTS Colour Temperature Change the Colour Temperature of the display to Normal, Warm, Cool or User. When the User Mode is selected, the Red, Green, and Blue values can be adjusted independently between 0 and 100. Low Blue Light Change the blue light emitted by the display between0 and 100. Hue Change the Hue value between 0 and 100.
DISPLAY Aspect Ratio Change the image aspect ratio to Wide Screen. 4:3 Auto. 1:1 AUDIO Mute Turn On and off to mute and unmute the audio output. Volume Adjust the output volume between 0 and 100. Audio Source Chose which source the audio is output from.
MULTI-WINDOW MultiWindow Choose the different formats of multi window display between Off, Picture in Picture (PIP) and Picture by Picture (PBP 2Win) Sub Win2 Input Choose the source of the second window between HDMI 1 and HDMI 2. PIP Size Adjust the size of the secondary source in PIP and PBP modes between Small, Medium and Large PIP Position Set the position of the secondary source in PIP and PBP modes between Top Right, Top Left, Bottom Right and Bottom Left.
OTHER Free Sync Mode MPRT Turn Free Sync On or Off. HDR: Turn HDR On (requires HDMI 2.0 input). Turn MPRT On or Off. Cross Turn cross on and off Reset Restore factory default setting. Firmware Update Update the monitor firmware with proper firmware Using the USB port.
SPECIFICATION eiQ-30CVWF200VAFSGH Panel Type 29.5” (21:9) LED Backlit Monitor Panel Dimensions 749.3mm Diagonal Case Type Plastic Best Resolution 2560(H)x1080(V)@200Hz Active Display Area 690.432(H)x291.276(V) Pixel Pitch 0.2697(H)x0.2697(V) Contrast Ratio 3000:1 Typical Brightness 350 cd/m² Response Time 20ms (GTG) Viewing Angle 176°/170° CR≥10 Display Colours 16.
TROUBLESHOOTING Problem Solution No power Insert the plug securely into the power outlet. Ensure that the equipment is connected properly. No picture Ensure the correct input is selected. Buttons on the monitor don’t do anything Noise or other interference Disconnect the power plug and then reconnect it. (The unit may not be operating properly due to lightning, static, or other factors.) Electronic equipment near the unit may be causing interference. Relocate the unit or move the equipment.
14
