USER MANUAL HD SMART LED TV WITH DVD PLAYER eiQ-32HDT2DVD
CONTENTS SAFETY INFORMATION 3 CONNECTION AND PREPARATION OF TV 6 WHAT IS INCLUDED 6 INSTALLATION OF LEGS 6 WALL MOUNTING 7 BUTTONS AND INTERFACE 8 CONNECTING TO EXTERNAL DEVICES 10 REMOTE CONTROL 11 INSTALLATION OF BATTERIES 12 INITIAL SETUP 13 BASIC OPERATION 14 CHANNEL SET UP 14 TUNING 15 TV MENU 16 PICTURE SETUP 16 SOUND SETUP 18 TIME 19 LOCK 20 SET UP MENU 21 MEDIA 24 DVD SETTINGS 28 TECHNICAL SPECIFICATIONS 31 TROUBELSHOOTING 32 MANUFACTURER SUPPORT 33 2
SAFETY INFORMATION Read these instructions – All the safety and operating instructions should be read before this product is operated. Keep these instructions – The safety and operating instructions should be retained for future reference. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions – All operating and usage instructions should be followed.
cabinet but ensure the guidance on clearances are followed. Do not tap or shake the TV screen, this may damage internal components. Diagrams within the manual are for illustrative purposes only, and as such there may be differences to the actual product received. At full volume, prolonged listening may damage the users hearing. WARNING Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death.
ATTENTION Place the TV on a firm and flat surface, leaving a space of at least 10cm around the set and 30cm from the top of the set to the ceiling or cabinet. Ensure the TV is positioned close to the wall to avoid it falling when pushed. 10 cm 30 cm 10 cm 10 cm When twisting the TV set, do not hold the top of the TV, you should twist from the base.
CONNECTION AND PREPARATION OF THE TV WHAT IS INCLUDED TV Set Remote Control (2 x AAA Batteries) User Manual . 4 Bolts 2 Legs INSTALLATION OF LEGS 1 Place the TV with the front facing downwards on a soft cloth pads on a desk. 2 Insert the legs into the sockets on the base of the TV. 3 Insert the screws into the sockets and tighten them with a screwdriver. Do not use an electric screwdriver, or similar.
WALL MOUNTING • • • The TV is provided with mounting holes for a VESA approved wall mounting bracket (not supplied). The VESA mounting pattern is: 200x100mm and the size of the bolts is 4 x M6 x 10 (not supplied). Do not use bolts longer than the size specified above for your model or damage will occur to the internal components. NOTES: • Do not install this product until this manual has been read and understood thoroughly. Please keep these instructions for future reference.
BUTTONS To turn the TV ON/OFF POWER BUTON INPUT BUTTON To select the input source. MENU BUTTON To enter the main menu. CH+ BUTTON To select the next channel CH- BUTTON To select the previous channel VOL+ BUTTON To increase the volume. VOL- BUTTON To decrease the volume. To start or pause playback. PLAY / PAUSE BUTTON To eject the DVD from the internal drive.
BUTTON FUNCTIONS HDMI2 HDMI3 USB1 / USB2 YPbPr HEADPHONE OPTICAL INPUT / OUTPUT TERMINALS VGA VGA AUDIO VIDEO L R RF IN HDMI1-3 USB x2 Mini YPbPr Input Headphone OPTICAL AUDIO VIDEO L R RF IN HDMI1 PC Video input. PC Audio input. Video input Composite Video – can be used for connecting older Left Audio input equipment Right Audio input Antenna connection. For connecting DVD players, set top boxes, games consoles, etc. Provides access to SMART TV.
Optical Cable Headphones HDMI2 HDMI3 USB1 / USB2 YPbPr HEADPHONE OPTICAL CONNECTING TO EXTERNAL DEVICES VGA AUDIO VIDEO L R RF IN HDMI1 Aerial VGA Cable Audio Cable Amplifier or Sound Bar 10 HDMI Cable
REMOTE CONTROL ON/ OFF Select the signal source. Audio options Switch between audio modes Change the screen aspect ratio Picture options Channel selection Favourite channel list Change between TV/ Radio Freeze picture Change screen angle Change language Enter sleep mode Go to DVD menu Go to DVD set-up Navigation Enter the menu Exit current navigation Enter display settings Increase/ Decrease volume Next/ Previous channel Mute Change text size/ Forward (DVD) Reveal Info.
INSTALLATION OF BATTERIES 1 Remove the battery cover from the rear of the remote control. 2 3 Install two AAA 1.5V batteries. (Ensure the correct polarity of the batteries.) Replace the battery cover. Please take out of the batteries from the remote when it is not going to be used for a long period of time. If the remote control doesn't work properly, please carry out the following checks. • Check the TV is turned on. • Check the polarity of the batteries are correct.
FIRST TIME SETUP Press the INPUT button to display the input source list. Press the▼ / ▲ or OK button to select the input source Press the OK button to select the input source, Press the EXIT button to quit. Select OSD Language Use the▼ / ▲ / ◄ / ► buttons to highlight the OSD Language. Press the ENTER button to select the OSD Language you want to. First Time Setup Select Country Use the▼ / ▲ / ◄ / ► buttons to highlight your Country. Press the ENTER button to select the Country Auto Tuning D .
CHANNEL MENU Press MENU button to display the main menu. Use the ◄ / ► buttons to select CHANNEL in the main menu. 1. Use the ▼ / ▲ buttons to select the option that you want to adjust in the CHANNEL menu. 2. Press the Enter button to adjust. 3. After finishing your adjustment, Press the Enter button to save and return to the previous menu. Auto Tuning Use the ▼ / ▲ buttons to select Auto Tuning, then press Enter/► button to enter.
ATV Manual Tuning Use the ▼ / ▲ buttons to select ATV Manual Tuning, then press Enter button to enter the sub-menu. DTV Manual Tuning Use the ▼ / ▲ buttons to select DTV Manual Tuning, then press the Enter button to enter the sub-menu. Program Edit Use the ▼ / ▲ buttons to select Program Edit, then press the Enter button to enter the sub-menu.
PICTURE MENU Press the MENU button to display the main menu. Use the ◄ / ► buttons to select PICTURE in the main menu. 1. Use the ▼/ ▲buttons to select the option that you want to adjust in the PICTURE menu. 2. Press OK button to adjust. 3. After finishing your adjustment, Press the MENU button to save and return to the previous menu. Color Color Temper ature Picture Mode Use the ▼/ ▲button to select Picture Mode, then press the OK button to enter sub-menu.
Colour Temperature Change the overall colour cast of the picture. Use the ▼/ ▲buttons to select Colour Temperature, then press OK to enter the sub-menu. Use the ◄ / ►buttons to select between Cool, Normal and Warm. You can change the red, green and blue values when the colour temperature is set to User mode. Cold: Increase the blue tone for the white. Normal: Increase the linked colours for the white. Warm: Increase the red colour for the white.
SOUND MENU Press the MENU button to display the main menu. Use the ◄ / ► buttons to select SOUND in the main menu. 1. Use the ▼ / ▲ buttons to select the option that you want to adjust in the SOUND menu. 2. Press the Enter button to adjust. 3. After finishing your adjustment, Press Enter button to save and return to the previous menu. SOUND MODE Use the ▼/ ▲buttons to select Sound Mode, then press Enter to enter the sub-menu. Use the ▼/▲button to select.
TIME MENU Press the MENU button to display the main menu. Use the◄ / ► buttons to select TIME in the main menu. 1. Use the▼ / ▲ buttons to select the option that you want to adjust in the TIME menu. 2. Press Enter button to adjust. 3. After finishing your adjustment, Press the Enter button to save and return to the previous menu. Sleep Timer Use the ▼ / ▲ buttons to select the Sleep Timer, then press Enter to enter the sub-menu.
LOCK MENU Press the MENU button to display the main menu. Use the ◄ / ► buttons to select Lock in the main menu. 1. Use the ▼/ ▲buttons to select the option that you want to adjust in the LOCK SYSTEM menu. 2. Use the Enter/◄ / ► buttons to adjust. 3. After finishing your adjustment, Press MENU button to return back to the previous menu . Lock System Use the ▼/ ▲buttons to select Lock System, then press Enter and enter the password. The default password is 0000.
SETUP MENU Press the MENU button to display the main menu. Use the ◄ / ► buttons to select SETUP in the main menu. 1. Use the ▼ / ▲ buttons to select the option that you want to adjust in the SETUP menu. 2. Press the Enter button to adjust. 3. After finishing your adjustment, Press Enter button to save and return to the previous menu. OSD Language Select the OSD menu language to be displayed. The default is English. Use the▼/ ▲/ ◄ / ► buttons to select Menu Language.
First Time Installation Use the ▼/ ▲buttons to select First time installation, then press Enter to enter. Caption Use the ▼/ ▲buttons to select Caption, then press Enter to turn on or off. Software Update (USB) Use the ▼/ ▲buttons to select Software Update (USB), plug your USB device in the USB slot, then press Enter to update the software.
SCREEN MENU (PC MODE ONLY) Press the MENU button to display the main menu. Use the◄ / ► buttons to select SCREEN in the main menu. 1. Use the ▼ / ▲ buttons to select the option that you want to adjust in the SCREEN menu. 2. Press the Enter button to adjust. 3. After finishing your adjustment, Press the Enter button to save and return to the previous menu. Auto Adjust Press the Enter button to start adjusting H-Offset/V-Offset/Size/Phase automatically. Horizontal Pos.
MEDIA MENU To enter the Media menu, a USB device should be inserted, and the INPUT button used to set the Input Source to Media Use the ◄ / ► buttons to select the option you want to view in the Media menu, then press Enter to enter. Photo Use the◄ / ► buttons to select PHOTO in the main menu, then press Enter to enter. Press the Exit button to return to the previous menu and exit menu to quit.
Music Menu Use the◄ / ► buttons to select MUSIC in the main menu, then press Enter to enter. Press Exit to return to the previous menu and exit menu to quit. Use the ◄ / ► buttons to select the drive you want to watch, then press Enter to enter. Use the ◄ / ► buttons to return to the previous menu.
Movie Menu Use the ◄ / ► buttons to select MOVIE in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Use the ◄ / ► buttons to select the drive you want to watch, then press Enter to enter. Press media button to play the selected movie. Press display to select the menu at the bottom you want to run, then press Enter button to operate. Press Exit to go back to the previous menu and the exit button again to quit the entire menu.
Text Menu Use the ◄ / ► buttons to select TEXT in the main menu, then press Enter button to enter. Press Exit to return to the previous menu and exit menu to quit. Use the ◄ / ► buttons to select the drive you want to watch, then press the Enter button to enter. Use the◄ / ► buttons to select return option to back to the previous menu.
DVD The DVD settings menu is operated using arrows on the remote control. Use the▼ / ▲ buttons to select an item within the menu and the ◄ / ► buttons to adjust it. General Settings Page TV Display Some DVD discs have been authored in 4:3 aspect ratio format. To see the material in its original mode, you may need to change the Aspect ratio. Pan & Scan (4: 3) Black edges left and right will be seen. Letterbox (4: 3) Top and bottom of the screen may be black.
Dolby Setup Dynamic is the difference between the maximum level and the minimum level of sound. This function is generally used when playing high volume programs at night, in order not to disturb the neighbour. This setting can lower the volume while keeping the original tone quality. This is the range, measured in decibels(dB), between the loudest and the quietest sound registered in a soundtrack.
Preference Setup General Audio - - Preference Page TV Type Audio Subtitle Disc Menu Parental Password Go To Dolby -- Video Preference PAL Eng Eng Eng Default Preference Page TV Type Select between PAL. AUTO or NTSC. Audio Select the preferred language for DVD audio. 1. The selected language is assigned high priority and can therefore be adopted automatically when the player begins playing a disc. 2. Languages vary between discs, depending on the DVD.
TECHNICAL SPECIFICATION Product Model eiQ-32HDT2DVD Screen Size 32” Diagonal Aspect Ratio 16:9 Power Supply AC 100-240V, 50/60Hz Power Consumption 65W TV System PAL DVB-T2/-T/-C (There is no DVB-C signal in some Countries or Areas.
SIMPLE TROUBLESHOOTING If the display fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. Symptom Solution Power cannot be turned on. (Power indicator does -Check that both ends of the power cable are plugged into the not illuminate.) socket appropriately and the wall socket is operational -Check that the aerial cable is connected properly.
electriQ UK SUPPORT Complete online support form on www.electriQ.co.uk/support Service Line: 0871 620 1057 Office hours: 9AM - 5PM Monday to Friday Unit J6, Lowfields Business Park, Lowfields Way, Elland West Yorkshire, HX5 9DA PRODUCT DISPOSAL Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products.
