User Manual

7
MOUNT INSTALLATION
1. Open the package and take out the product with foam still attached Gently place it
on a desktop or table. Remove the parts and the foam covering the monitor. If the
monitor is already attached to the stand, remove the stand.
2. Press the button to remove the adapter on back of monitor, then tighten the included
four screws onto the mounting holes on back of monitor.
WALL MOUNTING
• The monitor is provided with mounting holes for a VESA approved wall mounting
bracket (not supplied).
• When wall mounting, the supplied extension bolts must be fitted to the rear of the
monitor to allow the bracket to fix firmly to the rear of the monitor.
• M4 x12 bolts (not supplied) should be used to attach the bracket to the extension
bolts.
• Do not use bolts longer than the size specified above for your model or damage
will occur to the internal components.