USER MANUAL 49” LED MONITOR eiQ-49CV5UWD120FSHQA Thank you for choosing electriQ Please read the user manual before using this monitor and keep it safe for future reference Visit www.electriQ.co.
CONTENTS SAFETY 3 WHATS INCLUDED 5 STAND INSTALLATION 6 WALL MOUNTING 7 CONNECTIONS 8 GETTING STARTED 9 MONITOR CONTROLS 9 INITIAL SET UP 9 SHORTCUT BUTTONS 10 MENU OPTIONS 10 OSD MENU 11 INPUT 11 BRIGHTNESS/CONTRAST 11 COLOUR 12 PICTURE QUALITY 12 DISPLAY 13 AUDIO 13 MULTI-WINDOW 14 OSD 14 OTHER 15 TECHNICAL SPECIFICATION 16 TROUBLESHOOTING 17 SUPPORT 17 2
SAFETY INFORMATION • • • • • • • • • • • • • • • • • • • • • • Read these instructions - All the safety and operating instructions should be read before this product is operated. Keep these instructions - The safety and operating instructions should be retained for future reference. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions - All operating and usage instructions should be followed.
• • • • • • • • • inside. Trying to service the unit yourself is dangerous and may invalidate the product's warranty. Only qualified personnel should service this apparatus. Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2") clearance all around. Do not tap or shake the screen, this may damage internal components. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
WHAT’S INCLUDED 15 mm DP CABLE USER MANUAL SCREW BOLTS POWER SUPPLY STAND (UPRIGHT SECTION) 5 17mm 35mm MONITOR MOUNTING SCREW BOLTS REMOTE CONTROL STAND BASE
STAND INSTALLATION 1. Open the package, take out the product with foam s�ll a�ached, and gently place it on a desktop or table. 2. Take out the two main parts of the stand. Then use the screwdriver (not included) and the screws to fasten base to the stem. 3. Align the stand stem’s bracket with the opening on the back of the monitor and carefully insert bracket. The pieces should click into place. 4. Before removing the stand, remove the port cover from the back of monitor.
WALL MOUNT INSTALLATION This monitor ONLY includes screws which may be used when a�aching the monitor to a mount. No mount or moun�ng accessory is included. 1. Open the package, take out the product with foam s�ll a�ached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor was already a�ached to the stand, remove the stand. 2. Remove the original screws x 4 from the opening in the back of the monitor.
NOTES: Do not pinch the screen directly with your hand when hanging the product to prevent the screen from breaking. Due to the heavy weight and dimensions of LCD screens and their fragile nature, we recommend that they are unpacked and assembled by 2 people and professional installers are used to wall mount them (Wall moun�ng is op�onal). If you do not understand the instruc�ons, or are unsure how to install this product, please contact a professional for assembly advice and assistance.
GETTING STARTED MONITOR CONTROLS E Select signal source or Exit the menu Go Up within the Main Menu or increase the value of the selected item Go Down within the Main Menu or decrease the value of the selected item M Enter the Main OSD Menu and Select submenu Turn the monitor on or Off INITIAL SETUP CONNECT THE MONITOR TO A POWER OUTLET 1. Press the POWER bu�on on the monitor or to turn it on (The indicator will be blue) 2. Connect the relevant cable to the corresponding input on the monitor.
SHORTCUT BUTTONS The monitor includes one touch op�ons to access common se�ngs. eco Power Off Main Menu Display Crosshairs Switch HDMI 4K or HDMI 5K Scene mode switching MENU OPTIONS The menu for the monitor can be accessed by pressing the menu bu�on on the control panel. This menu is separated into the following sub menus: Input source, Brightness/Contrast, Colour Se�ngs, Picture Quality Se�ngs, Display, Audio, OSD (On screen display), and other.
OSD MENU INPUT SOURCE HDMI1 Resolution: 3840x2160@30Hz SDR DP1 DP2 HDMI1 HDMI2 InputSource: HDMI1 Resolution: 3840x2160@30Hz 3 4 InputSource: Resolution: Signal InputSource： Resolution： InputSource： Resolution： Switch the signal input or select the source.
COLOUR SETTINGS HDMI1 Resolution: 3840x2160@30Hz SDR Gamma 2.2 Picture Mode Standard Color Temperature Warm Low Blue Light 0 Hue 50 Saturation 50 InputSource: HDMI1 Resolution: 3840x2160@30Hz 3 4 InputSource: Resolution: Gamma Picture Mode Colour Temperature Low Blue Light Hue Satura�on InputSource： Resolution： InputSource： Resolution： Change the Gamma value for the display between 1.8, 2.0, 2.2, 2.4, 2.6 Change the picture mode between Standard, Photo, Movie, Game, FPS and RTS.
DISPLAY HDMI1 Resolution: 3840x2160@30Hz SDR Aspect Ratio Wide Screen HDMIEDID SwitchMode HDMI 5K InputSource: HDMI1 Resolution: 3840x2160@30Hz InputSource： Resolution： 3 4 InputSource: Resolution: Aspect Ra�o HDMI Switch Mode InputSource： Resolution： Change the image aspect ra�o to Wide Screen. 4:3 Auto. 1:1 Change switch between HDMI 4K or HDMI 5K.
MULTI-WINDOW HDMI1 Resolution: 3840x2160@30Hz SDR Multi-Window Off Sub Win2 Input DP2 Sub Win3 Input HDMI1 Sub Win4 Input HDMI2 Swap InputSource: HDMI1 Resolution: 3840x2160@30Hz 3 4 InputSource: Resolution: Mul�-Window Sub Win2 Input Sub Win3 Input Sub Win4 Input SWAP InputSource： Resolution： InputSource： Resolution： Choose the different formats of mul� window display between Off, Picture in Picture (PIP) and Picture By Picture (PBP 2Win) Choose the source of the second window between DP1 ,
OTHER HDMI1 Resolution: 3840x2160@30Hz SDR DP Version DP1.4 FreeSync(Adaptive Sync) Off HDR Off Reset InputSource: HDMI1 Resolution: 3840x2160@30Hz 3 4 InputSource: Resolution: DP Version InputSource： Resolution： Change the DP version FreeSync Turn Free Sync On or Off. (Adap�ve Sync) HDR Reset InputSource： Resolution： Turn the HDR on or off. Restore factory default se�ng.
SPECIFICATION eiQ-49CV5UWD120FSHQA Screen Size 49” Diagonal Panel Type VA Panel Aspect Rao 21:9 Power Supply AC 100-240V ~ 50/60Hz, 2.0A Power Consump�on 80W Type, 105W Max Dimensions (with stand) 1178.4 * 466.02 * 240 .18 mm Net / Gross Weight 11.0 kg / 14.8 kg Terminals Picture Product Model Maximum Resolu�on 5120 * 1440 Brightness 350 cd/m2 Sta�c Contrast 3000:1 Viewing Angle (H/V) 178° / 178° USB Input USB 2.0 x 1 HDMI Input HDMI 2.0 x 2 Display Port Input DP 1.
TROUBLESHOOTING Problem Solu�on No power Insert the plug securely into the power outlet. Ensure that the equipment is connected properly. No picture Ensure the correct input is selected. Disconnect the power plug and then reconnect it. (The unit may not be opera�ng properly due to lightning, sta�c, or other factors.) Bu�ons on the monitor don’t do anything Noise or other interference Electronic equipment near the unit may be causing interference. Relocate the unit or move the equipment.
108.007.13171 H3CQR-HQ eiQ-49CV5UWD120FSHQA EIectriQ 2020.12.
