Instruction Manual
7
WALL MOUNT INSTALLATION
This monitor ONLY includes screws which may be used when aaching the monitor to a mount.
No mount or mounng accessory is included.
1. Open the package, take out the product with foam sll aached, and gently place it on a desktop
or table. Remove the extra parts and the foam covering the monitor. If the monitor was already
aached to the stand, remove the stand.
2. Remove the original screws x 4 from the opening in the back of the monitor. Follow the direcons
received with your mount, stand, or accessory and install the monitor on the wall or xture as
desired. Remember to use the included screws when aaching anything to the back of the
monitor.
Do not discard the original screws as these may be needed for future use.
3. Follow the direcons received with your mount, stand, or accessory and install the monitor on the
wall or xture as desired.