USER MANUAL eiQ-49SUWD144FSH 49 INCH CURVED LED MONITOR eiQ-49SUWD144FSHQ 49 INCH CURVED QLED MONITOR Please read this manual thoroughly before use and keep it handy for future reference
CONTENTS SAFETY INFORMATION 3 CONNECTION AND PREPARATION OF THE MONITOR 5 WHAT IS INCLUDED 5 ATTACHING THE STAND 6 WALL MOUNTING 7 CONTROL PANEL 7 INPUT / OUTPUT TERMINALS 8 INITIAL SETUP 8 QUICK MENU 9 MENU OPTIONS 9 INPUT SOURCE 10 BRIGHTNESS / CONTRAST 10 COLOUR SETTINGS 11 PICTURE QUALITY SETTINGS 12 DISPLAY 13 AUDIO 13 MULTI WINDOW 14 OSD 15 OTHER 16 TECHNICAL SPECIFICATION 17 SIMPLE TROUBLESHOOTING 18 MANUFACTURER SUPPORT 18 2
SAFETY INFORMATION Read these instructions – All the safety and operating instructions should be read before this product is installed or operated. Keep these instructions – The safety and operating instructions should be retained for future reference. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions – All operating and usage instructions should be followed.
WARNING Never place a monitor in an unstable location. A monitor may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Use cabinets or stands recommended by the manufacturer of the monitor. Only use furniture that can safely support the monitor. Ensure the monitor is not overhanging the edge of the supporting furniture.
ATTENTION Place the monitor on a firm and surface, leaving a space of at least 10cm around the unit and 30cm from the top of the unit to the ceiling or cabinet. Ensure the monitor is positioned close to the wall to avoid it falling when pushed. 10 cm 30 cm 10 cm flat 10 cm When twisting the monitor, do not hold by the top, you should twist from the base.
ATTACHING THE STAND Attach the base of the stand to the upright section of the stand using the three bolts provided. Carefully take the monitor out of the box and place upside down within the polystyrene insert, before locking the assembled stand onto the rear of the monitor.
WALL MOUNTING • The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied). • When wall mounting, suitable extension bolts must be fitted to the rear of the monitor to allow the bracket to fix firmly to the rear of the monitor. • The VESA mounting pattern is : 75 x75 mm and the size of the bolts is 2 x M4 x 42 and 2 x M4 x 24 (not supplied). • Do not use bolts longer than the size specified above for your model or damage will occur to the internal components.
INPUT / OUTPUT TERMINALS 1 1 2 3 4 5 6 2 3 4 6 5 Audio Output Socket DISPLAY PORT (DP) Supports DP 1.2, 144Hz, Freesync HDMI 1: Supports HDMI 2.0,144Hz, Freesync HDMI 2: Supports HDMI 1.4,75Hz, Freesync HDMI 3: Supports HDMI 1.4,75Hz, Freesync AC Power Socket INITIAL SETUP Connect the monitor to a power outlet. 1. Press the POWER button on the monitor or to turn it on (The indicator will be blue) 2. Connect the relevant cable to the corresponding input on the monitor.
QUICK MENU Press any button when the on screen display is not visible to display the Quick Menu. Then Press the button below the item in the quick menu to select. Power Off Main Menu RGB Range Display Crosshairs Change LED Settings (On Stand) MENU OPTIONS The main menu for the monitor can be accessed by selecting it within the Quick menu (See previous page).
INPUT SOURCE 144Hz Change the input between DisplayPort (DP), HDMI 1, HDMI 2, or HDMI 3. BRIGHTNESS/CONTRAST Brightness Adjust the brightness of the display between 0 and 100. Contrast Adjust the contrast of the display between 0 and 100. DCR Turn the Dynamic Contrast Ratio feature On or Off.
COLOUR SETTINGS Gamma Change the Gamma value for the display between 1.8, 2.0, 2.2, 2.4, or 2.6. Picture Mode Change the picture mode between Standard, Photo, Movie, Game, FPS and RTS Colour Temperature Change the Colour Temperature of the display to Warm, Cool or User. When the User Mode is selected, the Red, Green, and Blue values can be adjusted independently between 0 and 100. Low Blue Light Change the blue light emitted by the display between0 and 100.
PICTURE QUALITY SETTING Sharpness Change the display Sharpness between 0 and 100. Response Time Turn the Response OverDrive feature between Off, High, Middle of low Noise Reduction Adjust the level of Noise Reduction between Low, Medium, High, or Off. Super Resolution Change the Super Resolution between Off, High, Middle, or Low. Dynamic Luminance Control Turn the Dynamic Luminance Control feature On or Off.
DISPLAY Aspect Ratio Change the image aspect ratio to Wide screen, Auto, 4:3, or 1:1. AUDIO Mute Turn On and off to mute and unmute the audio output. Volume Adjust the output volume between 0 and 100. Audio Source Chose which source the audio is output from.
MULTI-WINDOW Multi-Window Choose the different formats of multi window display between Off, Picture in Picture (PIP) and Picture By Picture (PBP 2Win) Sub Win2 Input Choose the source of the second window between HDMI 1, HDMI 2, and HDMI 3. PIP Size Adjust the size of the secondary source in PIP and PBP modes between Small, Medium and Large PIP Position Set the position of the secondary source in PIP and PBP modes between Top Right, Top Left, Bottom Right and Bottom Left.
OSD Language Change the OSD Menu display language between English, Chinese, Korean, Russian, Spanish, Japanese and French. OSD H Position Change the horizontal position of the OSD Menu. OSD V Position Change the vertical position of the OSD Menu. OSD Transparency Change the transparency value of the OSD Menu between 0 and 100. OSD Time Out Change how long the OSD Menu is on before it automatically exits. OSD Rotation: Rotate the OSD Menu for ease of use on rotated screens.
OTHER DP Version Set the DP version between 1.1 and 1.2 FreeSync (AdaptiveSync) Turn FreeSync On or Off. HDR HDR can be set to On, Off or Autodetect. Reset Restore factory default setting.
TECHNICAL SPECIFICATION Product Model Screen Size Panel Type Aspect Ratio Power Supply Power Consumption Dimensions Net/Gross Weight Terminals Picture Audio Output Power (Internal) Maximum Resolution Brightness Static Contrast Response time Viewing Angle (H/V) USB Input HDMI Input Display Port Input Audio Output Working Temperature Working Humidity eiQ-49SUWD144FSH 49” Diagonal VA Panel 32:9 AC 100-240V, 50/60Hz 65W (Typical) 1198.5 x 471 x 245.6 10.9 / 14.
SIMPLE TROUBLESHOOTING If the display fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. Symptom Solution Power cannot be turned Check that both ends of the power cable are plugged into the on. (Power indicator does socket appropriately and the wall socket is operational not illuminate.) No Input Signal message appears.
