User Manual

SETTING UP THE WIFI APP

CONNECTING USING AP MODE (ALTERNATIVE METHOD)

Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing

once per second. If not follow the instructions for changing the WIFI connection mode. Also ensure

your phone is connected to the WIFI network. (We advise turning mobile data off during setup)

2. Open the app and press “+”

to add device

2. Select the type of device

as “Air Conditioner” within

the Large Home Appliance

tab.

3. Press on the AP mode button

in the top right of the screen.

4. Ensure the WIFI light on the air

conditioner is slowly flashing

(once per three seconds),

then press on the orange

button at the bottom of the

screen to confirm

5. Enter your WIFI password and

press confirm.

6. Go to network settings in your

phone and connect to the

“SmartLife xxx” connection.

There is no password to enter.

Then return back to the app to

complete setup.

This will then transfer the settings to the air conditioner.

Once the connection process has completed, go back to the network settings on your phone to ensure

your phone has reconnected to your WIFI router.