User Manual

PRODUCT OVERVIEW

HOW IT WORKS

COOLING MODE

The compressor (6) in the external unit compresses the refrigerant into a high-temperature, high-pressure

gas. When this gas flows along the cooling fins of the condenser (7), heat is exuded and the gas condenses

into a liquid, which is then led to the evaporator (1) in the indoor unit. The liquid expands into a gas at a low

temperature and low pressure. This gas absorbs the warmth of the air in the room, and a fan (3) draws the

air through the filter and over the evaporator (1), blowing the cooled air back into the room. The heat is

moved to the compressor along with the gas. A fan (8) draws air over the condenser and blows the warm air

away.

1. Evaporator

2. Filter

3. Evaporator Fan

4. Gas Line

5. Liquid line

6. Compressor

7. Condenser

8. Condenser Fan

HEAT PUMP MODE

The system operates in reverse: the condenser works as an evaporator, the evaporator as a condenser:

warm air is blown into the room. It is ideal as a maintenance heating when outside temperature is not too

low and when the indoor temperature is more than 7°C.

DEHUMIDIFYING

As with cooling, the moisture in the air condenses on the cold evaporator at room temperature

acting as a powerful dehumidifier.