Instruction Manual

Page 4 of 10
• The heater is designed to be used at temperatures above -20°C. If it is exposed
to temperatures below this, it must be allowed to warm above this level before
operation.
• Do not attempt to repair, disassemble or modify the appliance. This unit contains
no user-serviceable parts.
• Always unplug or disconnect the appliance from the mains power supply when not
in use, or when moving or cleaning it. Do not pull the cord to unplug the heater.
• Keep the heater clean. Do not allow any object to enter the ventilation or
exhaust opening as this may cause electric shock, fire, or damage to the heater.
• Do not use the appliance for anything other than its intended use. It is designed
for domestic indoor use only.
• There may be a trace of odour during the first few minutes of initial use, or after a
period of storage. This is normal and will quickly disappear.
• This appliance has hot and arching or sparking parts inside. Do not use it in
areas where gasoline, paint, or any flammable liquids are used or stored.
• This appliance is not intended for use in bathrooms, laundry areas and similar
humid locations. Never locate this appliance where it may fall into a bathtub or
otherwise become exposed to water.
• The remote contains a lithium battery, keep out of reach of small children. Seek
Medical advice if swallowed.
• To prevent battery leakage: Remove the battery from the remote if exhausted or
before long periods of storage.
ENERGY SAVING AND UNIT SAFETY PROTECTION TIPS
• Do not cover or restrict the airflow. Do not use in dusty environment.
• For safety and maximum performance the minimum distance from a wall or
objects should be 50cm.
WARNING: To reduce the risk of fire or electrical shock, DO NOT use this appliance
with any solid state Speed Control Device or any variable speed controllers.